On 06/04/2018 12:32 PM, Kalderon, Michal wrote:

Hi Vlad, Arlin,

Thanks for the daily build.

We currently have two issues with qedr:

 1. We need to add newer FW
 2. It seems that even though iWARP support exists in 4.17 and the
    code seems to be
    part of compat-rdma that I extracted from your build, our iWARP
    devices are not detected.
    we need to investigate this issue.

Arlin – do we need to open bugzilla’s for these two issues ?

Vlad, are the development git’s up to date?

Thanks,

Michal


Hi Michal,
If your FW is a part of the compat-rdma package and it was updated since linux-4.17-rc1 then the next build of OFED will include newer FW.

Regards,
Vladimir


*From:*ewg [mailto:ewg-boun...@lists.openfabrics.org] *On Behalf Of *Vladimir Sokolovsky
*Sent:* Friday, May 18, 2018 10:46 PM
*To:* Davis, Arlin R <arlin.r.da...@intel.com>; ewg@lists.openfabrics.org
*Subject:* Re: [ewg] OFED-4.17 daily build status - 20180502-1140

On 05/18/2018 08:38 PM, Davis, Arlin R wrote:

    Hello Vlad,

    Thanks for the first OFED 4.17 daily build. It seems to build and
    install fine on our servers with 4.17 RC5 kernel but we cannot run
    anything.

    Here is a quick status for reference:

    Console message: *infiniband mlx5_0: ib_register_mad_agent: QP 0
    not supported*


Hi Arlin,
Please try to update HCA firmware to the latest version:
http://www.mellanox.com/downloads/firmware/fw-ConnectX4-rel-12_22_1002-MCX455A-ECA_Ax-UEFI-14.15.19-FlexBoot-3.5.403.bin.zip

Regards,
Vladimir



    hca_id: mlx5_0

    transport: InfiniBand (0)

    fw_ver: 12.14.2036

    node_guid: 7cfe:9003:00d4:10d0

    sys_image_guid: 7cfe:9003:00d4:10d0

    vendor_id: 0x02c9

    vendor_part_id:                               4115

    hw_ver:                                             0x0

    board_id: MT_2180110032

    phys_port_cnt:                                 1

    port:      1

    state:                                   PORT_ACTIVE (4)

    max_mtu:                           4096 (5)

    active_mtu:                       1024 (3)

    sm_lid:                                0

    port_lid:                              0

    port_lmc:                           0x00

    link_layer:                          Ethernet

    # ib_write_bw -a -d mlx5_0

    Couldn't allocate MR

    failed to create mr

    Failed to create MR

    Couldn't create IB resources

    After a reboot, it hangs. We are investigating.

    Thanks,

    Arlin




    _______________________________________________

    ewg mailing list

    ewg@lists.openfabrics.org <mailto:ewg@lists.openfabrics.org>

    http://lists.openfabrics.org/mailman/listinfo/ewg


_______________________________________________
ewg mailing list
ewg@lists.openfabrics.org
http://lists.openfabrics.org/mailman/listinfo/ewg

Reply via email to