An upgrade choosing replace all works fine if you've done all of the other steps needed for 2003.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Microsoft Exchange List Server Sent: Monday, January 26, 2004 11:06 AM To: Exchange Discussions Subject: MSX2K ADC versus MSX2K3 ADC Hi all, I have installed a W2K ADC in our forest, I have not configured any CA yet, there is no MSX2000 yet in the forest. I plan to install MSX2003 instead, do you recommend removing the MSX2K ADC and installing the new MSX2003ADC or an in place upgrade to msx2003 ADC will be sufficient? thx -Eric _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with.
