I am using the 3ware controllers with parallel IDE drives and am very happy
with them.  I have had a lot more problem with SCSI raid, but that is
probably due to the early 10,000 rpm drives that compaq was using.  Use good
drives and keep them cool and either IDE or SCSI will work fine.  There is
no interface disadvantage to IDE with the 3ware controller as each drive
gets a dedicated connector and hardware interface.

Tom 

-----Original Message-----
From: Sean Faust [mailto:[EMAIL PROTECTED] 
Sent: Sunday, February 08, 2004 11:09 PM
To: Exchange Discussions
Subject: Exchange Hardware Question

I have been tasked with migrating our current Exchange 5.5 environment, 7
servers most fairly maxed out on storage running Standard edition.  The
requirement from my boss is to use Q-Sol servers with 3Ware IDE Raid cards.
Would any of you trust Exchange on IDE Raid for a 1500 user environment?????
The users will be spread out over 4 servers with memory and processors not
being an issue but I am heavily sketchy on using IDE Raid with Exchange.
Thanks in advance for any help offered!

Sean Faust
540 Boulevard, SE
Atlanta, GA  30312

Home  404-624-1089
Cell     706-773-1437

[EMAIL PROTECTED]




_________________________________________________________________
List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
Web Interface:
http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang
=english
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]
To unsubscribe via postal mail, please contact us at:
Jupitermedia Corp.
Attn: Discussion List Management
475 Park Avenue South
New York, NY 10016

Please include the email address which you have been contacted with.

_________________________________________________________________
List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
Web Interface: 
http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]
To unsubscribe via postal mail, please contact us at:
Jupitermedia Corp.
Attn: Discussion List Management
475 Park Avenue South
New York, NY 10016

Please include the email address which you have been contacted with.

Reply via email to