Yup fiters configured and enabled in the SMTP Virtual Server.. There is a pop up box that reminds you to enable it every time you configure a filter.
Yet even with DNSBL filter configured the users who where not able to connect when the Symantec AV software had the DNSBL are able to connect when the E2k3 server runs the DNSBL. So either the Filter isn't working at all or authentication overrides connection filtering. But I need to know which is taking place. Any Ideas? Thanks Jim -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ben Winzenz Sent: Friday, February 27, 2004 8:10 AM To: Exchange Discussions Subject: Spam:RE: Connection Filters First, you need to check that you have enabled the Filter. Not only do you have to configure the settings under Global\Message Delivery\Connection Filtering, but you ALSO have to enable the filter on the SMTP Virtual Server. VS properties, Advanced, Edit, tick the box to enable the Connection Filter. Have you done that? If not, the filter isn't actually enabled. Ben Winzenz Microsoft Exchange MVP Network Engineer Gardner & White Ph (317) 843-3418 -----Original Message----- From: Jim McGowan [mailto:[EMAIL PROTECTED] Posted At: Thursday, February 26, 2004 6:36 PM Posted To: Exchange (Swynk) Conversation: Connection Filters Subject: Connection Filters I just reconfigured my DNSBL service on my E2k3 server. Previously the DNSBL was configured in our Symantec AV for Exchange engine but the DNSBL service is blocking outside users with Dynamic IP's who need to relay through our server. So I removed the DNSBL entry from the Symantec system and configured it in the E2k3 server where its more grainular. I fully expected the users to continue to be rejected with the plan of setting up a 2nd SMTP virtual server for outside relay users only. But I found the users CAN relay email with the DNSBL filter configured in the E2k3 server. So my question is: Does Relay Restrictions\Allow Authenticated Users to Relay override Global\Message Delivery\Connection Filter ????????? Thanks Jim _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&; lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&; lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with.
