Yes -----Original Message----- From: Brian Ko [mailto:[EMAIL PROTECTED]] Sent: Friday, December 28, 2001 2:05 PM To: Exchange Discussions Subject: RE: CRC errors
Did you set to 100MB for speed and Full for duplex setting on both your server and switch? Brian -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Pillai, Raj Sent: Friday, December 28, 2001 12:19 PM To: Exchange Discussions Subject: CRC errors I have been seeing CRC errors on my Exchange Server CPQNTAC utility for the last few days, multiplying at the rate of about 2500 errors over a period of 24 hours on an average. Considering that CRC errors could be hardware related I swapped the NIC but this did not resolve the issue, my next step is to schedule some downtime and check cables etc. It does seem to be within our network as our ISP has cleared their T1 lines. Any ideas or comments on this issue would be appreciated. MSExchange 5.5 sp4 on NT Server sp6. Thanks Raj _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]
