Change it to * on all your connectors and it will select the best route based on cost values.
ADMD is only relevant for foreign (ie outside your Exchange org) systems. Your current settings are fine. ------------------------------------------------------ Roger D. Seielstad - MCSE Senior Systems Administrator Peregrine Systems Atlanta, GA http://www.peregrine.com > -----Original Message----- > From: Sandoval, LaCretia, Triaton/US [mailto:[EMAIL PROTECTED]] > Sent: Monday, January 14, 2002 8:55 AM > To: Exchange Discussions > Subject: RE: GWART > > > So If I change it on both bridgeheads to be *: then traffic > for each site should flow through the bridgehead for that > site right? Also, I had a question about the administrative > management domain name. What is this used for? I read that > if you set this up for each site then the traffic will be > more controlled. Currently all sites in the entire org are > set to the default "None". > > Regards, > ________________ > LaCretia Sandoval > Dallas LAN Administrator > Triaton, NA, Inc. > 972-443-4027 > _______________________ > > -----Original Message----- > From: Roger Seielstad [mailto:[EMAIL PROTECTED]] > Sent: Monday, January 14, 2002 7:36 AM > To: Exchange Discussions > Subject: RE: GWART > > Neil has it right, however - '*@*' more closely matches the > target address, so the connector with which that is > associated will be chosen every time. > > ------------------------------------------------------ > Roger D. Seielstad - MCSE > Senior Systems Administrator > Peregrine Systems > Atlanta, GA > http://www.peregrine.com > > > > -----Original Message----- > > From: missy koslosky [mailto:[EMAIL PROTECTED]] > > Sent: Monday, January 14, 2002 8:03 AM > > To: Exchange Discussions > > Subject: Re: GWART > > > > > > Nope. LaCretia is correct - * should be the only address space. > > > > Missy > > ----- Original Message ----- > > From: "Neil Hobson" <[EMAIL PROTECTED]> > > To: "Exchange Discussions" <[EMAIL PROTECTED]> > > Sent: Monday, January 14, 2002 7:49 AM > > Subject: RE: GWART > > > > > > Something in the back of my mind says that *@* is a better > > match than just *. But you still haven't stated what your > > desired flow is.... > > > > Neil > > > > -----Original Message----- > > From: Sandoval, LaCretia, Triaton/US [mailto:[EMAIL PROTECTED]] > > Posted At: 14 January 2002 12:37 > > Posted To: Exchange Mailing List > > Conversation: GWART > > Subject: RE: GWART > > > > > > One of the address spaces on one bridgehead is listed as > > *(A)* and the other is listed as *:. One of our admins from > > our NJ site stated that we need to add the *(A)* to the other > > bridgehead. I tend to disagree though. I tend to think that > > the *(A)* needs to be set to match *:. Everything I have > > researched has stated that it should be *;. > > > > Regards, > > ________________ > > LaCretia Sandoval > > Dallas LAN Administrator > > Triaton, NA, Inc. > > 972-443-4027 > > _______________________ > > > > -----Original Message----- > > From: Chris Scharff [mailto:[EMAIL PROTECTED]] > > Sent: Friday, January 11, 2002 3:29 PM > > To: Exchange Discussions > > Subject: RE: GWART > > > > I've read them, but could I explain how to in general. Um, > > not without a six pack... however, it is Friday afternoon. > > > > What is the address space on your IMS boxxen? What is the > > desired flow for IMS traffic? > > > > > -----Original Message----- > > > From: Sandoval, LaCretia, Triaton/US > [mailto:[EMAIL PROTECTED]] > > > Sent: Friday, January 11, 2002 1:50 PM > > > To: Exchange Discussions > > > Subject: GWART > > > > > > > > > I have two sites with two bridgeheads in place. My problem is, > > > internet traffic is coming in one and going out the other > > bridgehead. > > > I decided to look into the routing table to see why this > > is. However, > > > I decided it would be easier to review the table by printing the > > > GWART0.MTA information and read through it. I discovered > > that there is > > > no entry for the new site that I brought up with the new > > bridgehead. > > > Does anyone out there have any experience reading the > > GWART0.MTA file? > > > I am having trouble piecing all of the routes together to draw a > > > picture of how traffic is flowing through our site. Any > help would > > > be greatly appreciated. > > > > > > Regards, > > > LaCretia Sandoval > > > > _________________________________________________________________ > > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > > Archives: http://www.swynk.com/sitesearch/search.asp > > To unsubscribe: mailto:[EMAIL PROTECTED] > > Exchange List admin: [EMAIL PROTECTED] > > > > _________________________________________________________________ > > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > > Archives: http://www.swynk.com/sitesearch/search.asp > > To unsubscribe: mailto:[EMAIL PROTECTED] > > Exchange List admin: [EMAIL PROTECTED] > > > ********************************************************************** > > This email and any files transmitted with it are confidential > > and intended solely for the use of the individual to whom it > > is addressed. Any view or opinions presented are solely those > > of the author and do > > not necessarily represent those of Silversands, or any of its > > subsidiary companies. > > If you have received this email in error, please contact > our Support > > Desk immediately by telephone on 01202-360000 or via email at > > [EMAIL PROTECTED] > > > ********************************************************************** > > > > _________________________________________________________________ > > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > > Archives: http://www.swynk.com/sitesearch/search.asp > > To unsubscribe: mailto:[EMAIL PROTECTED] > > Exchange List admin: [EMAIL PROTECTED] > > > > > > > > _________________________________________________________________ > > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > > Archives: http://www.swynk.com/sitesearch/search.asp > > To unsubscribe: mailto:[EMAIL PROTECTED] > > Exchange List admin: [EMAIL PROTECTED] > > > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]
