Yes one thing I did notice is when I backup the accountants 98 pc and do a registry backup of the sserver it doesnt lockup but when I do a full online backup it does
-----Original Message----- From: Olds, Dominic [mailto:[EMAIL PROTECTED]] Sent: Friday, March 01, 2002 9:21 AM To: Exchange Discussions Subject: RE: Ram upgrade NT4 SP6 Pagefile or virtual memory on NT4 must always be a minimum of the amount of RAM plus 12Meg. Anything less and the OS can't flush the memory if it needs to. Re-applying the SP will make no difference at all unless the machine was not up to date anyway. All you have changed is hardware, no new software has been loaded. However, you SHOULD run the exchange optimizer as this will most likely recommend some changes. I run Veritas 8.6 and know it to be fussy about changes to machines. I suggest you delete and re-create your exchange backup job. This will probably fix it. -----Original Message----- From: Tener, Richard [mailto:[EMAIL PROTECTED]] Sent: 01 March 2002 14:16 To: Exchange Discussions Subject: Ram upgrade NT4 SP6 Hello, I upgraded the Ram on my server from 512 to 1gig about a week ago. I found that after installing the Ram my server would lockup only when the backup is running. So I put all the backups on hold and my server runs great. I have backup exec 8.5. I emailed veritas about the problem and this is what they suggested: As a rule by Microsoft, whenever you apply any new software or Hardware changes, Microsoft recommends to re-apply Service Pack on top of an existing one. Just try reapplying SP6a on top of an existing one which is most likely to be the cause. Also, since your Virtual Memory size will be as per your old RAM size. You need to reconfigure Virtual Memory size E.g.: try setting it to 600MB You also need to reapply Softpaq which comes with Compaq machines. For further information, please refer the documentation came along with Compaq. Awaiting your feedback. Warm Regards, Vmail Team So my question is has anyone ever had this problem and if so do you think I should do what they suggested above. Thanks Richard Tener _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]
