Kevin,

The problem is that it isn't working...  Looking through the IMC queue I see
a message going to [EMAIL PROTECTED] with the "network error during host
resolution" error message as the status...  there's no MX record, but I can
resolve hofferflow.com just fine and their mail server answers just fine to
a telnet on port 25 at the address provided by the A record.  

It should work, but it's not working.......

-----Original Message-----
From: Kevin Miller [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 13, 2002 2:49 PM
To: Exchange Discussions
Subject: RE: Network Error During Host Resolution


That would work as it is the top of your domain.. If you used
bob.hofferflow.com you would not get anything..

--Kevinm M, WLKMMAS, UCC+WCA, And Beyond
Did I just say that out loud?


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Joe Pochedley
Sent: Wednesday, March 13, 2002 11:34 AM
To: Exchange Discussions
Subject: RE: Network Error During Host Resolution


Kevin,

Explain this one then..  Email going to [EMAIL PROTECTED] No MX
record for hofferflow.com, but they do have an A record (12.4.104.2)...
They're using their TLD as the mail exchanger but I'm still getting
"Network Error durig host resloution" messages...  

I can telnet to hofferflow.com port 25 and get Exchange's ESMTP
greeting......

???

JoeP

-----Original Message-----
From: Kevin Miller [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 13, 2002 2:17 PM
To: Exchange Discussions
Subject: RE: Network Error During Host Resolution


Read what I wrote. It explains you problem. You have to use your top
level domain name it you don't have an MX record.

--Kevinm M, WLKMMAS, UCC+WCA, And Beyond
Did I just say that out loud?


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Joe Pochedley
Sent: Wednesday, March 13, 2002 11:12 AM
To: Exchange Discussions
Cc: '[EMAIL PROTECTED]'
Subject: RE: Network Error During Host Resolution


Roger,

If it's MailGuard that's causing the problem, why do emails to
durr-usa.com seem to go through OK, but not the ones to de.durr-usa.com?

-----Original Message-----
From: Roger Seielstad [mailto:  
Sent: Wednesday, March 13, 2002 1:36 PM
To: Exchange Discussions
Subject: RE: Network Error During Host Resolution


Hmmm... The tlot pickens..

bash-2.04$ telnet de.durr-usa.com 25
Trying 65.43.129.25...
Connected to de.durr-usa.com.
Escape character is '^]'.
220 ***************************************************2**0*0 *****


Tell their admins to change their PIX configuration to include: No fixup
protocol smtp 25

Their PIX is running MaulGuard (oops, Mailguard), which has known issues
with some ESMTP mailers (funny enough, Exchange is one of them). Its all
over the CISCO support pages.

Alternately, set your IMC to only use SMTP rather than ESMTP for that
domain. I'd suggest, since they're being less than nice about it, you
tell them their firewall is screwed up. Its more fun that way...

I can't find the Cisco article about it, but those *** are indicative,
IIRC.

------------------------------------------------------
Roger D. Seielstad - MCSE
Sr. Systems Administrator
Peregrine Systems
Atlanta, GA


> -----Original Message-----
> From: Joe Pochedley [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, March 13, 2002 12:11 PM
> To: Exchange Discussions
> Subject: RE: Network Error During Host Resolution
> 
> 
> I know there's no MX record (I stated that in my original post).  
> According to the RFC for SMTP (forget the number right now), if 
> there's no MX record but there is an A record (which there is) then 
> the SMTP server should use the A record as an MX record and attempt 
> delivery to the address referenced in the A record.
> 
> I tried telling the folks at the remote company that they should haven

> an MX record for their subdomain, but got the "Nobody else is having a

> problem so we're not going to do anything about it." type response.
> 
> Re: To the person who asked about telnet testing...  I tried Telnet 
> testing and get a 220 connect message from de.durr-usa.com, but when a

> send a HELO command, I never get a 250 response back.  Again, 
> according to the folks at the remote end, "Nobody else is having a 
> problem..."
> 
> Thanks....... Still looking......
> 
> Joe Pochedley
> "I like deadlines,"
> cartoonist Scott Adams once said.
> "I especially like the whooshing 
> sound they make as they fly by."
> 
> 
> -----Original Message-----
> From: Nick Field [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, March 13, 2002 11:56 AM
> To: Exchange Discussions
> Subject: RE: Network Error During Host Resolution
> 
> 
> There does not appear to be a MX record for de.durr-usa.com Perhaps 
> this is your problem.
> 
> Nick
> 
> 
> 
> -----Original Message-----
> From: Joe Pochedley [mailto:[EMAIL PROTECTED]]
> Sent: 13 March 2002 16:40
> To: Exchange Discussions
> Subject: Network Error During Host Resolution
> 
> Kind ladies and gentlemen of the list.  I am sending this message 
> again in hopes that someone will be able to help me.
> I'm not intending to spam the list, just looking for some 
> assistance.  I've heard from a few people off list that 
> they've also experienced similar problems, but none of them 
> have / had a solution and were hoping that I had found 
> something with yesterday's inquiry.......
> 
> If anyone out there can help, or at least give me another direction to

> explore I would greatly appreciate it.  (I know about MS PSS and it is

> my final option, but I'd rather not go there).
> 
> My Exchange Server is v5.5 SP4
> 
> Problem is as follows:
> 
> -Begin Quoted Error Message-
>  
> Your message did not reach some or all of the intended recipients.
> 
>       Subject:        RE: Durr Industries 
>       Sent:   3/10/02 1:11 PM
> 
> The following recipient(s) could not be reached:
> 
>       '[EMAIL PROTECTED]' on 3/12/02 1:01 PM
>             The recipient name is not recognized
>       The MTS-ID of the original message is: c=US;a= 
> ;p=namfg;l=SEQUOYAH-020310181103Z-71
>             MSEXCH:IMS:namfg:cleveland:SEQUOYAH 3499
> (000B09AA) network error during host resolution
> 
>       [EMAIL PROTECTED] on 3/12/02 1:01 PM
>             The recipient name is not recognized
>       The MTS-ID of the original message is: c=US;a= 
> ;p=namfg;l=SEQUOYAH-020310181103Z-71
>             MSEXCH:IMS:namfg:cleveland:SEQUOYAH 3499
> (000B09AA) network error during host resolution
> 
> -End Quoted Error Message-
> 
> I'm getting this error when trying to send to de.durr-usa.com, and 
> have in the past had this error on a few other addresses, but the 
> message has always eventually gone through in the past.  This time 
> though, I can't get anything to go through to de.durr-usa.com.  
> Supposedly, we have been able to send to these recipients in the past,

> but it's only been in the past two months that there have been any 
> problems that the end user has complained about...  No changes have
> been made to our Exchange Server or DNS servers for at least 
> the past 4-6 months.
> 
> I am able to look up de.durr-usa.com using the same DNS server that 
> the exchange server is using, so it's not that the DNS server can't 
> resolve the host name...  I looked up durr-usa.com's DNS records and 
> there is no MX record for the sub domain 'de' but there is an A 
> record, so theoretically the Exchange SMTP service should use the A 
> record in place of the MX record, correct?
> 
> I am at a loss.
> 
> Thanks in advance.
> 
> Joe Pochedley
> 
> _________________________________________________________________
> List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
> Archives:               http://www.swynk.com/sitesearch/search.asp
> To unsubscribe:         mailto:[EMAIL PROTECTED]
> Exchange List admin:    [EMAIL PROTECTED]
> 

_________________________________________________________________
List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
Archives:               http://www.swynk.com/sitesearch/search.asp
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]

_________________________________________________________________
List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
Archives:               http://www.swynk.com/sitesearch/search.asp
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]



_________________________________________________________

Do You Yahoo!?

Get your free @yahoo.com address at http://mail.yahoo.com




_________________________________________________________________
List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
Archives:               http://www.swynk.com/sitesearch/search.asp
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]

_________________________________________________________________
List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
Archives:               http://www.swynk.com/sitesearch/search.asp
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]



_________________________________________________________

Do You Yahoo!?

Get your free @yahoo.com address at http://mail.yahoo.com




_________________________________________________________________
List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
Archives:               http://www.swynk.com/sitesearch/search.asp
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]

_________________________________________________________________
List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
Archives:               http://www.swynk.com/sitesearch/search.asp
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]

Reply via email to