Most
the people here who use it on a monthly basis would have a very difficult time
explaining what the log files are, what they are used for, and why they are
there. don't go by them. Listen to people who know what they are talking about.
DON'T TOUCH eseutil unless you are on the phone with PSS or know what you are
doing and have a very good backup.
The
best maintance for Exchange is apply service packs. other then that nothing
needs to be done. The longer a server is up the better.
Kevinm M WLKMMAS, UCC+WCA,
CKWSE
List Charter and FAQ at:-----Original Message-----
From: Dimitri Limanovski [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 31, 2001 8:13 AM
To: MS-Exchange Admin Issues
Subject: RE: EseutilSo what is the best practice with defragmentation?MS says that "ESEUITL is not considered a tool for regular maintenance and should only be used in case of emergency after contacting Microsoft Technical Support". On the other hand, there're people here that use it on monthly basis!So, to use or not to use?List Charter and FAQ at:-----Original Message-----
From: Kopec, David [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 31, 2001 10:41 AM
To: MS-Exchange Admin Issues
Subject: RE: EseutilThis statement is NOT entirely accurate. Try the following syntax and you can direct wherever you want including mapped drives. For example, C:\exchsrver/bin>eseutil /d /ispriv /tf:\tempedb.edb. Notice, there is no space between the /t and the drive you wish to defrag on.-----Original Message-----
From: Abercrombie, Sherry [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 31, 2001 9:23 AM
To: MS-Exchange Admin Issues
Subject: RE: EseutilI'm not familiar with E2K, but on 5.5 I regularly (read monthly) run eseutil. I run it because that is the ONLY way to regain space in the Exchange DB that has been freed up by messages being deleted etc. If I did not do this on a regular basis I would hit the Exchange 5.5 IS limit.I would guess that it would be /t f:/tempedb.edb or what ever you plan to use for the defrag. It may not work, it doesn't work in 5.5 when you try to redirect the temp database, it must run on the same physical drive that it is stored.Good luck.SherryList Charter and FAQ at:-----Original Message-----
From: Martin Blackstone [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 31, 2001 7:34 AM
To: MS-Exchange Admin Issues
Subject: RE: EseutilWhy do you need to defrag the IS? Has MS told you to do this?eseutil is a tool that if you are not familiar with, you shouldn't be using. Now tell us why you want to do it.List Charter and FAQ at:-----Original Message-----
From: Irfan GM [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 31, 2001 12:19 AM
To: MS-Exchange Admin Issues
Subject: Eseutil
Hi
How do I use the /t switch with eseutil , i need to defrag the database and there is not enogh storage space
in C: , where exchange 2000 is loaded.Thanks
List Charter and FAQ at:
Irfan
http://www.sunbelt-software.com/exchange_list_charter.htm
http://www.sunbelt-software.com/exchange_list_charter.htm
http://www.sunbelt-software.com/exchange_list_charter.htm
List Charter and FAQ at:
http://www.sunbelt-software.com/exchange_list_charter.htm
http://www.sunbelt-software.com/exchange_list_charter.htm
http://www.sunbelt-software.com/exchange_list_charter.htm