Surely you mean the reverse, and you need to set the default PF database property on your new mailbox database to use your existing PF database?
I can't think of any reason why you can't mount the PF database, but also at a loss to why it was dismounted. Is there a peculiarity with Digiscope? Richard From: bounce-9475438-8066...@lyris.sunbelt-software.com [mailto:bounce-9475438-8066...@lyris.sunbelt-software.com] On Behalf Of Chris Pohlschneider Sent: 12 January 2012 14:23 To: MS-Exchange Admin Issues Subject: RE: Exchange 2003 SP2 DB Corruption We created a new private info store database within exchange and moved mailboxes using digiscope to the new database. Before we started doing this, I dismounted the public folder store. Now I want to mount this again, but trying to figure out if the public folder store will automatically recognize the new database that was created. We are getting eventid 8197 MSExchangeFBPublish errors now and I believe that is due to the public folder store being dismounted. Just want to make sure once it is mounted, it will recognize new database file just fine. Anyone have thoughts on this? From: Michael B. Smith [mailto:mich...@smithcons.com]<mailto:[mailto:mich...@smithcons.com]> Sent: Wednesday, January 11, 2012 3:42 PM To: MS-Exchange Admin Issues Subject: RE: Exchange 2003 SP2 DB Corruption Yes, that's correct. It's quite simple if there are no problems. However, I recommend you read the section in the DROG (Exchange Server 2003 Disaster Recovery Operations Guide). Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com From: Chris Pohlschneider [mailto:cpohlschnei...@smsprotech.com]<mailto:[mailto:cpohlschnei...@smsprotech.com]> Sent: Wednesday, January 11, 2012 3:04 PM To: MS-Exchange Admin Issues Subject: RE: Exchange 2003 SP2 DB Corruption Michael, Can you elaborate a little further on rolling forward with the log files? Does that mean restoring the known good DB from a few days ago, then applying todays log files against it to bring the database up to date? From: Michael B. Smith [mailto:mich...@smithcons.com]<mailto:[mailto:mich...@smithcons.com]> Sent: Wednesday, January 11, 2012 2:48 PM To: MS-Exchange Admin Issues Subject: RE: Exchange 2003 SP2 DB Corruption I hate to be the bearer of bad news, but that KB doesn't apply. And I'll attempt to get it removed. It applied in the case when you had Exchange 2003 sp1 installed on a workstation and you had Exchange 2003 sp2 installed on a server (or versus). 7638 is the same version. The .1 vs. .2 doesn't matter. You have -1018 errors, which means you have physical database corruption. Your best option, if possible, and you have all log files, is to roll forward. Regards, Michael B. Smith Consultant and Exchange MVP http://TheEssentialExchange.com<http://console.mxlogic.com/redir/?5YQsTsjhpvdInupvsopdw0MijYqFjUjBFUQ7S9X0z_bCXYDuZXTLuZPtPp2Hsbund7b0VZ5Usnujvpod7b0afbhBjGdM8uvcLiHIP6N_BPqrbXWpJ5BdNB5ZVxwSO-r1oQAq81EfIjS17Ph0DuX9Ew60ICq80Upd40BmcmRFOH0TfM-u0USyrvdInupvvvd79Kbp5mmi3LLcm> From: Chris Pohlschneider [mailto:cpohlschnei...@smsprotech.com]<mailto:[mailto:cpohlschnei...@smsprotech.com]> Sent: Wednesday, January 11, 2012 2:26 PM To: MS-Exchange Admin Issues Subject: Exchange 2003 SP2 DB Corruption Hello All, I have an issue with an Exchange 2003 DB that has some corruption. The eventid's are 467 and 474. I am following KB article 329817. The customer has a good DB backup from three days ago, but I am trying to fix the corruption with the current DB. I ran eseutil /g and it told me that there is corruption in the DB. So I then proceeded to run eseutil /d and it gave me the following error after a little over a minute of running "Operation terminated with error -1018(Jet_errReadVerifyFailure, checksum error on a database page) after 72 seconds. I researched this error and found KB article 555524. This article says that my eseutil version is different from my DB version. I checked the eseutil version and it is at 6.5.7638.1 and the server version is at 6.5.7638.2 Is there anyway to get an updated eseutil file to match the DB version? Thanks in advance for your help. Thanks, Chris Pohlschneider | SMS proTech o. 937.494.7080 f. 937.498.2180 e. cpohlschnei...@smsprotech.com<mailto:cpohlschnei...@smsprotech.com> A Division of Perry Corporation --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/<http://console.mxlogic.com/redir/?1vd7dT4QmnPr5TCnT66jo0eRokGv_axVZicHsLAvgB72k0Ij2QMow-cwso1AMOcwi30Yg6bIKA2oO8x90rurcS2IwK6xpM62EO1NgKdl2iHY1o6hf5MY2xlU2D1gp3bXUPU30M2wO6xVU5fxkw92wOoEnbu8A0GqegG6xHwEcC7NMOd1wn1rwjott4E2VUMIal5gM6g8v3MO-831oc2gj31oIn5Ll4oA0O6LyAyoQosc5MoXlwOwMDc1wQibnGC65xEMO7y03AkPWwOaEtEqPglp38jp51oQswhoo1AMOcwi1870uwA2N8ns5hgf4FzppQTvAXTLuZXTKrKr8lrxrOVEVo7fEL3yXOrXb1EVo1hVqcGthK13PVBWltCoSfYKrjpvvjdEIFKcELLcc6SnPob6Azh0d1ZyuM8-q84XTpd40M5APh0739Ew4GNySJelo6V-7PM76QPrVJyXPbXXVEVdQ3JvsjRM> or send an email to listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com> with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/<http://console.mxlogic.com/redir/?1vd7dT4QmnPr5TCnT66jo0eRokGv_axVZicHsLAvgB72i9B0sw2m07lw5ELwAiw2n716JX0s273_6wjsf387304W1gmJ4snw67g53OMLk-onv0xkis0o3BwCbv0gaGBg62Hw32govl2qE70EmZl4b0aY6r0k1N8K61ImZmVlJkkQeaNc4genmr6ob2i0EaA181RhMwG8yN3oyCWg38Q6lA0QaygSGwqen2RNpA1C09c4Me0V4QswA2wMbf8C21EV4yR_s4itPhOuafwgbk2gSw5weW76fg5N81MJ5Y4yk0i2gIj34gGzEK15gC4EzoldTVeZXTLuZXCXCO5mUmYKqem1PWbMUKYC-OMqem0kumzaDkrwgY-puBnpCdz_bCQSnTQPqbarzabXP31JBYS2NF8Qg3gvoDI2fCy1eZSjh0c1pcQg1MOq81aIoJHjBm1KvxYY1NJAS-roKYO---qejtIH9VMVp> or send an email to listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com> with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/<http://console.mxlogic.com/redir/?1vd7dT4QmnPr5TCnT66jo0cYJ6leET0xVYOZaKPcr7-nOfWxyFoltH5JmC6XYDuZXTLuZPtPp2Hsbund7b0VZ5Usnujvpod7b0afbhBjGdM8uvcLiHIP6N_BPqrbXWpJ5BdNB5ZVxwSO-r1oQAq81EfIjS17Ph0DuX9Ew60ICq80Upd40BmcmRFOH0TfM-u0USMrvdInupvvvd79ItPlWhkp8bLQ> or send an email to listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com> with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/<http://console.mxlogic.com/redir/?2-qerK9EILCSbLcLKccCM0pVqcGthK13PVBWltCoSfYLAvR35iMGXmbqJcdTVeZXTLuZXCXCO5mUmYKqem1PWbMUKYC-OMqem0kumzaDkrwgY-puBnpCdz_bCQSnTQPqbarzabXP31JBYS2NF8Qg3gvoDI2fCy1eZSjh0c1pcQg1MOq81aIoJHjBm1KvxYY1NJYS-roKYO---qejtkxa622D9Z6r> or send an email to listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com> with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com> with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
