Hello... after upgrading to kernel-2.2.10.32mdk I found this, It never happened with the kernel-2.2.9-19 or 2.2.9.27, so I guess it has something to do with kernel 2.2.10-32mdk. not properly "detecting my cdrom, BTW is not an aztec, its an Office-Pro 36x Mod. CDR- OP36XJ ************************************************* aztcd: AZTECH, ORCHID, OKANO, WEARNES, TXC, CyDROM CD-ROM Driver aztcd: (C) 1994-98 W.Zimmermann aztcd: KernelVersion=2.2.10-32mdk DriverVersion=2.60 For IDE/ATAPI-drives use ide-cd.c aztcd: If you have problems, read /usr/src/linux/Documentation/cdrom/aztcd aztcd: Autoprobing BaseAddress=0x320 aztcd: Autoprobing BaseAddress=0x300 aztcd: Autoprobing BaseAddress=0x310 aztcd: Autoprobing BaseAddress=0x330 aztcd: no AZTECH CD-ROM drive found cm206 cdrom driver $Revision: 1.5 $ can't find adapter! aztcd: AZTECH, ORCHID, OKANO, WEARNES, TXC, CyDROM CD-ROM Driver aztcd: (C) 1994-98 W.Zimmermann aztcd: KernelVersion=2.2.10-32mdk DriverVersion=2.60 For IDE/ATAPI-drives use ide-cd.c aztcd: If you have problems, read /usr/src/linux/Documentation/cdrom/aztcd aztcd: Autoprobing BaseAddress=0x320 aztcd: Autoprobing BaseAddress=0x300 aztcd: Autoprobing BaseAddress=0x310 aztcd: Autoprobing BaseAddress=0x330 aztcd: no AZTECH CD-ROM drive found Sony CDU-535: probing base address 340 Did not find a Sony CDU-535 drive cm206 cdrom driver $Revision: 1.5 $ can't find adapter! **************************************** I use two Maxtor EIDE HDDs, one is a 11gigs and a 4.3 gigs in the first IDE connector the CDROM has always been set as Master on the second IDE controller. The motherboard is a A-trend ATC-6220, Intel-440BX AGPset ATX for Pentium-II processors up to 450mhz. Support for Dual master IDE Ultra DMA-33 any ideas? how about kernel-2.2.10-34mdk... or should I go back to 2.2.9.27mdk ? Sergio Korlowsky