I have recently installed an Hauppauge TV WinTV Theater card on a
Compaq 5640/5670 running LM6.1. The card has Dolby surround stereo,
radio tuner and remote control. TV seems to work OK, but overlay is
not functional, see output below. Seems to be a conflict between DGA
and v4l about the memory address to use for my Maxigamer Banshee
card. Also, the radio does not work. What about the remote control?
Do I have to compile a new hernel, either a patched 2.2.x or
2.3.x? The same situation remains after an upgrade to LM7.0 and xaw-3.0.7.
Best regards,
[EMAIL PROTECTED]
/proc/pci:
Bus 1, device 0, function 0:
VGA compatible controller: 3Dfx Banshee (rev 3).
Fast devsel. Fast back-to-back capable. IRQ 5.
Non-prefetchable 32 bit memory at 0x40000000 [0x40000000].
Prefetchable 32 bit memory at 0x42000000 [0x42000008].
I/O at 0x1000 [0x1001].
/etc/conf.modules:
alias char-major-81 videodev
alias char-major-81-0 bttv
pre-install bttv modprobe -k msp3400; modprobe -k tuner
options i2c scan=1
options bttv radio=1 vidmem=0x42000000 pll=2
options tuner type=5
/sbin/lsmod:
Module Size Used by
bttv 39896 0 (unused)
tuner 2092 1 (autoclean)
msp3400 12512 1 (autoclean)
i2c-old 3776 3 [bttv tuner msp3400]
videodev 2560 3 [bttv]
/var/log/messages:
Dec 29 17:51:33 compaq kernel: Linux video capture interface: v1.00
Dec 29 17:51:53 compaq kernel: i2c: initialized
Dec 29 17:51:53 compaq kernel: bttv0: Brooktree Bt878 (rev 2) bus: 0, devfn: 32, irq:
3, memory: 0x48100000.
Dec 29 17:51:53 compaq kernel: PCI: Enabling bus mastering for device 00:20
Dec 29 17:51:53 compaq kernel: bttv: 1 Bt8xx card(s) found.
Dec 29 17:51:53 compaq kernel: bttv0: Hauppauge eeprom: tuner=Philips FM1216 (5)
Dec 29 17:51:53 compaq kernel: bttv0: audio chip: TDA9840
Dec 29 17:51:53 compaq kernel: bttv0: fader chip: TEA6300
Dec 29 17:51:53 compaq kernel: bttv0: model: BT878(Hauppauge new)
Dec 29 17:51:53 compaq kernel: msp3400: daemon started
Dec 29 17:51:53 compaq kernel: msp3400: init: chip=MSP3410D-B4, has NICAM support
xawtv:
This is xawtv-3.03, running on Linux/i686 (2.2.13-22mdk)
visual: id=0x22 class=4 (TrueColor), depth=16
x11: 1280x1024, 16 bit/pixel, 2560 byte/scanline, DGA, VidMode
waitpid: No child processes
waitpid: No child processes
v4l: 1280x1024, 16 bit/pixel, 2560 byte/scanline
WARNING: v4l and dga disagree about the framebuffer base
WARNING: Is v4l-conf installed correctly?
ov_fbuf.base=(nil), base=0x42000000
WARNING: overlay mode disabled
wmhooks: kde