Larry Sword wrote:
Belay my last. After reading my own message I saw the problem. Had to add
the IRQ number that the kernel maps.
The lilo should be:
append="ide2=0xd400,0xd802,18 ide3=0xe999,0xe402,18 hdc=ide-scsi
hdd=ide-scsi"
--------------------------------------^^^------------------------^^^
Thanks
> 1. Can't get to IDE2 or IDE3
>
> System:
> OS: Mandrake-Linux 7.02 AIR smp
> Abit BP6 with BIOS QQ
> Matrox G400 AGP
> SoundBlaster Lice in PCI-2
> PCI -3 is open , I left this open because it shares IRQ with the HPT366
> controller. So there could not be any conflicts.
> PCI-4 NIC
> PCI -5 NIC
> ----------------------------
>
> I decided to install a new UDMA66 drive on the HPT366 controller at
> ide2.
> Okay what am I missing or doing wrong here.
>
> >From my lilo:
>
> boot=/dev/hda
> map=/boot/map
> install=/boot/boot.b
> vga=ext
> default=linux
> append="ide2=0xd400,0xd802 ide3=0xe999,0xe402 hdc=ide-scsi hdd=ide-scsi"
>
> >From my message file:
>
> Mar 27 08:46:12 sword kernel: ide_setup: ide2=0xd400,0xd802
> Mar 27 08:46:12 sword kernel:
> Mar 27 08:46:12 sword kernel: ide_setup: ide3=0xe999,0xe402
> Mar 27 08:46:12 sword kernel:
> Mar 27 08:46:12 sword kernel: ide_setup: hdc=ide-scs
>
> --snip--
>
> Mar 27 08:46:13 sword kernel: hdc: TOSHIBA CD-ROM XM-6502B, ATAPI CDROM
> drive
> Mar 27 08:46:13 sword kernel: hdd: CD-R/RW RW7060A, ATAPI CDROM drive
> Mar 27 08:46:13 sword kernel: hde: Maxtor 54098U8, ATA DISK drive
> Mar 27 08:46:13 sword kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Mar 27 08:46:13 sword kernel: ide1 at 0x170-0x177,0x376 on irq 15
> Mar 27 08:46:13 sword kernel: ide2: Disabled unable to get IRQ -11.
> --------------------------------------^^^^^^^^^^^^^
>
> So the big question is, why cant't the kernel get the IRQ -11 and use
> the
> drive.
>
> *** The HPT366 controllers are liste as IRQ 18 in my /proc/interrupts
> after
> booting into Linux.
>
> TIA
>
> Larry
