David,
Thank you...
Found out that the driver for my cards is not yet part of std dist. of
Mandrake. I am using 3c905B cards. Found the driver but still can not get
ifconfig to recognize the device?
New attachments...
David Mihm wrote:
> On Sat, 26 Aug 2000, Jeff Hoffman wrote:
>
> > I am having trouble connecting with DHCPCD with Mandrake 7.1. Dmesg
> > gives me a warning about both ethernet cards at IRQ 0. My PNP OS is set
> > to NO. lspci see the cards. and eth1 says it comes up fine. However
> > ifconfig only shows the lo device. Any ideas?
>
> First, these are PCI cards, therefore isapnp (ISA) has nothing to do with
> anything. Secondly, this is a known issue with these cards and it is
> covered in the Ethernet HOWTO
> (http://www.linuxdoc.org/HOWTO/Ethernet-HOWTO.html), specifically on this
> page/section - http://www.linuxdoc.org/HOWTO/Ethernet-HOWTO-3.html#ss3.6
> .
>
> HTH
>
> p.s. HOWTOs are your friend. :)
> --
> | d a v i d @ m i h m
> | dmihm @ swbell.net
> | webmaster @ afterstep.org
> | ftpmaster @ afterstep.org
> | dmihm @ rchitecture.com
> --
Pnpdump.lst
Ifconfig.lst
Lspci.lst
Dmesg.lst
begin:vcard
n:Hoffman;Jeff
x-mozilla-html:TRUE
adr:;;;;;;
version:2.1
email;internet:[EMAIL PROTECTED]
fn:Jeff Hoffman
end:vcard