On my computer this error appears after a dummy write (maybe the problem
was fixating cdrom in this mode).
Try rebooting your computer and burning a cd without testing dummy write
first.
Salu2,
Oscar.
Caleb Newville wrote:
>
> OK, no matter which program I use, they are all just a shell to cdrecord,
> which seem to be what is at fault here. I get this error from cdrecord
> whenever I attempt to burn:
>
> ========================================================================
> Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg
> Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.17
> Using libscg version 'schily-0.1'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 1
> Vendor_info : 'Memorex '
> Identifikation : 'CRW-1622 '
> Revision : 'D4.0'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO
> Drive buf size : 1839104 = 1796 KB
> FIFO size : 4194304 = 4096 KB
>
> Track 01: data 617 MB
> Total size: 709 MB (70:15.28) = 316146 sectors
> Lout start: 709 MB (70:17/21) = 316146 sectors
> Current Secsize: 2048
> ATIP start of lead in: -11511 (97:28/39)
> ATIP start of lead out: 359849 (79:59/74)
> Disk type: Short strategy type (Phthalocyanine or similar)
> Manuf. index: 1
> Manufacturer: Auvistar Industry Co.,Ltd.
> Blocks total: 359849 Blocks current: 359849 Blocks remaining: 43703
> Starting to write CD/DVD at speed 2 in write mode for single session.
> Last chance to quit, starting real write in 9 seconds.
> 8 seconds.
> 7 seconds.
> 6 seconds.
> 5 seconds.
> 4 seconds.
> 3 seconds.
> 2 seconds.
> 1 seconds.
> Waiting for reader process to fill input buffer ...
> input buffer ready.
> Performing OPC...
>
> cdrecord: Input/output error. send opc: scsi sendcmd: retryable error
> status: 0x0 (GOOD STATUS)
> cdrecord: Resource temporarily unavailable. OPC failed.
>
> CDB: 54 01 00 00 00 00 00 00 00 00
>
> CDB: 1B 00 00 00 02 00
> cmd finished after 0.051s timeout 40s
>
> cdrecord: Input/output error. start/stop unit: scsi sendcmd: retryable
> error
> status: 0x0 (GOOD STATUS)
> cdrecord: fifo had 64 puts and 0 gets.
> cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
>
> ========================================================================
>
> As you can see, the drive is a memorex-cdw1622 on scsi bus 0,0,0 (via
> scsi-ide emulation). Can someone help me figure this one out? Thanks for
> all the help so far and in advance for this one.
>
> -Caleb Newville
