OK, I downloaded and compiled KOnCD, and it appears to be doign it's job,
but cdrecord is not, I get this output both via command line and KOnCD.
========================================================================
Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg
Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'Memorex '
Identifikation : 'CRW-1622 '
Revision : 'D4.0'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1839104 = 1796 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 617 MB
Total size: 709 MB (70:15.28) = 316146 sectors
Lout start: 709 MB (70:17/21) = 316146 sectors
Current Secsize: 2048
ATIP start of lead in: -11511 (97:28/39)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 1
Manufacturer: Auvistar Industry Co.,Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 43703
Starting to write CD/DVD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 9 seconds.
8 seconds.
7 seconds.
6 seconds.
5 seconds.
4 seconds.
3 seconds.
2 seconds.
1 seconds.
Waiting for reader process to fill input buffer ...
input buffer ready.
Performing OPC...
cdrecord: Input/output error. send opc: scsi sendcmd: retryable error
status: 0x0 (GOOD STATUS)
cdrecord: Resource temporarily unavailable. OPC failed.
CDB: 54 01 00 00 00 00 00 00 00 00
CDB: 1B 00 00 00 02 00
cmd finished after 0.051s timeout 40s
cdrecord: Input/output error. start/stop unit: scsi sendcmd: retryable
error
status: 0x0 (GOOD STATUS)
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
========================================================================
Can someone help me figure this one out? Thanks for all the help so far
and in advance for this one.
-Caleb Newville
Tom Brinkman writes:
> Well, I'll havt'a try KisoCD. I really like KOnCD, but it and a few
> others (eg, XCDroast, Gtoaster) error out when trying to burn 80min
> (750+mb's) audio CD's from wav's. Problem seems to be as soon as files
> are added to the 'to be burned' list once 650mb is surpassed, even tho
> I always check the 'ignore media size' options. XCDroast errors on
> calculating size, won't let you burn. KOnCD and Gtoaster segfault when
> 650 is exceeded in the file list. Gcombust doesn't have these problems.
> I've recently burned 78 to 79mins (~780mb's) to 80min/700mb CD's using
> Gcombust. I sure like KOnCD's GUI and simplicity much better tho. I've
> never had a problem with it burning 650mb CD's, data, audio, copying
> CD's, or making bootable CD's.
