To reply to my original post; First of all 'cat -f /var/log/messages' should have been, 'tail -f /var/log/messages'
Secondly it was brought to my attention that I had left out my /etc/fstab /dev/hda6 / reiserfs defaults 1 1 /dev/hda10 /Archive ext2 defaults 1 2 /dev/hdd5 /Archive2 reiserfs defaults 1 2 /dev/hda5 /boot ext2 defaults 1 2 none /dev/pts devpts mode=0620 0 0 /dev/hda8 /home reiserfs defaults 1 2 /dev/cdrom /mnt/cdrom iso9660 ro,nosuid,noauto,exec,user,nodev 0 0 /dev/cdrom2 /mnt/cdrom2 iso9660 ro,nosuid,noauto,exec,user,nodev 0 0 /dev/fd0 /mnt/floppy vfat sync,nosuid,noauto,user,nodev,unhide 0 0 /dev/sda1 /mnt/usb-reader vfat ro,noauto,user 0 0 none /proc proc defaults 0 0 /dev/hda9 /root reiserfs defaults 1 2 /dev/hda7 swap swap defaults 0 0 #mount /mnt/usb-reader mount: /dev/sda1: unknown device I do have a scsi cdrom/rw attached as well as a scsi scanner. On Wed, 24 Oct 2001 09:16:13 -0800 William Bouterse <[EMAIL PROTECTED]> wrote: > I recently purchased a SanDisk ImageMate for SmartMedia > due to their providing drivers for the linux community. > > I am using; > kernel 2.4.8-26mdk > LM 8.0+ "extries" > This company provided drivers which are compiled into the kernel > > > However, after a week of reading, browsing, configuring, ...no luck > > Pertinent data: > make menuconfig shows sddr09 compiled into the kernel > > /usr/src/linux-2.4.8/drivers/usb/storage/sddr09.c > /usr/src/linux-2.4.8/drivers/usb/storage/sddr09.h > > Oct 23 22:27:30 home2 usb: Loading USB interface (usb-ohci) succeeded > Oct 23 22:27:30 home2 usb: Mount USB filesystem succeeded > Oct 23 22:27:31 home2 usbd: usbd v0.1 (c) 1999 by Thomas Sailer > Oct 23 22:27:31 home2 usbd: Starting USB daemon succeeded > > #lsmod > usb-storage 52528 0 (unused) > usb-ohci 18880 0 (unused) > usbcore 50752 1 [usb-storage usb-ohci] > tuner 4784 1 (autoclean) > tvaudio 8576 0 (autoclean) (unused) > bttv 57200 0 (unused) > i2c-algo-bit 7328 1 [bttv] > i2c-core 13600 0 [tuner tvaudio bttv i2c-algo-bit] > videodev 5056 2 [bttv] > reiserfs 158304 4 > ncr53c8xx 52500 0 (unused) > sd_mod 11572 0 (unused) > scsi_mod 91804 2 [usb-storage ncr53c8xx sd_mod > > # lspcidrake > agpgart : Silicon Integrated Systems [SiS]|530 Host > unknown : Silicon Integrated Systems [SiS]|5513 [IDE] > unknown : Silicon Integrated Systems [SiS]|85C503/5513 > unknown : Silicon Integrated Systems [SiS]|ACPI > usb-ohci : Silicon Integrated Systems [SiS]|7001 USB > unknown : Silicon Integrated Systems [SiS]|5591/5592 AGP > ncr53c8xx : Symbios|53c825 > ne2k-pci : Winbond Electronics Corp|W89C940 > bttv : Brooktree Corporation|Bt878 > bttv : Brooktree Corporation|Bt878 > snd-card-ymfpci : Yamaha Corporation|YMF-740C [DS-1L Audio Controller] > Card:SiS 620 : Silicon Integrated Systems [SiS]|6306 3D-AGP > unknown : Virtual|Hub [] > unknown : SanDisk|ImageMate USB SmartMedia [] > > /proc/bus/usb/drivers > usbdevfs > hub > usb-storage > > /proc/bus/usb/devices > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB OHCI Root Hub > S: SerialNumber=d036a000 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=55aa ProdID=a103 Rev= 1.01 > S: Manufacturer=SanDisk > S: Product=ImageMate USB SmartMedia > S: SerialNumber=5EC52EB6C5 > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms > > harddrake gives > Vendor: Unknown > > Model: Unknown > > Kernel Module: Unknown > > Bus Type: USB > > Informations: This device hasn't been identified by HardDrake, please send >`/proc/bus/*' files and this device ID `55aaa103' to:[EMAIL PROTECTED] > > Three or four emails have gotten Zip response > > cat -f /var/log/messages unplugging and replug in gives; > Oct 24 09:04:06 home2 kernel: usb.c: USB disconnect on device 3 > Oct 24 09:04:27 home2 kernel: hub.c: USB new device connect on bus1/2, assigned >device number 4 > Oct 24 09:04:27 home2 kernel: usb.c: USB device 4 (vend/prod0x55aa/0xa103) is not >claimed by any active driver. > > I created various entries in /etc/fstab and atempted to mount them > but get "mount: /dev/sdwhatever : unknown device > > > I know this thing works for others ! > > What am I missing ??? > > William Bouterse > Talkeetna, Ak > I HAVE tried to contact [EMAIL PROTECTED] to let them know that this device should be recognized but is NOT. Is there an active contact point for them!? Thanks again, William Bouterse Talkeetna, Ak
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
