Alsa is started first, then sound during boot, at either init-3 or init-5...
-JMS |-----Original Message----- |From: [EMAIL PROTECTED] |[mailto:[EMAIL PROTECTED]] On Behalf Of [EMAIL PROTECTED] |Sent: Thursday, November 22, 2001 1:55 PM |To: [EMAIL PROTECTED] |Subject: Re: RE: [expert] SB Live! - no midi devices in kde | | |Gracias, Jose. |Tomorrow I will look for uninstalled RPM's and I will restart the |configuration steps from scratch. |BTW, do you start the alsa daemon on startup or just the sound |daemon? Thanks Salu2 Óscar. | |----- Mensaje Original ----- |Remitente: "Jose M. Sanchez" <[EMAIL PROTECTED]> |Fecha: Jueves, Noviembre 22, 2001 12:39 pm |Asunto: RE: [expert] SB Live! - no midi devices in kde | |> |> The loaded module list you have is way too small. |> |> Check out mine... |> |> Module Size Used by |> nfs 75072 0 (autoclean) |> nls_cp437 4400 0 (autoclean) |> smbfs 34624 0 (autoclean) |> agpgart 26752 3 (autoclean) |> NVdriver 715200 17 (autoclean) |> joydev 6176 0 (unused) |> emu10k1-gp 1456 0 (unused) |> analog 7488 0 (unused) |> gameport 1856 0 [emu10k1-gp analog] |> input 3648 0 [joydev analog] |> snd-synth-emu10k1 4432 0 (autoclean) |> snd-synth-emux 26784 0 (autoclean) [snd-synth-emu10k1] |> snd-seq-midi-emul 4944 0 (autoclean) [snd-synth-emux] |> snd-seq-virmidi 8304 0 (autoclean) [snd-synth-emux] |> snd-seq-midi 3552 0 (autoclean) (unused) |> snd-seq-oss 28944 0 |> snd-seq-midi-event 3216 0 [snd-seq-virmidi snd-seq-midi |> snd-seq-oss] |> snd-seq 41856 0 [snd-synth-emux snd-seq-virmidi |> snd-seq-midi snd-seq-oss snd-seq-midi-event] |> snd-pcm-oss 18624 0 |> snd-pcm-plugin 15792 0 [snd-pcm-oss] |> snd-mixer-oss 4800 0 [snd-pcm-oss] |> snd-card-emu10k1 2368 0 |> snd-emu10k1 22320 0 [snd-synth-emu10k1 |snd-card-emu10k1] |> snd-pcm 31616 0 [snd-pcm-oss snd-pcm-plugin |> snd-emu10k1] |> snd-timer 8528 0 [snd-seq snd-pcm] |> snd-rawmidi 10048 0 [snd-seq-midi snd-emu10k1] |> snd-emux-mem 1776 0 [snd-synth-emux snd-emu10k1] |> snd-ac97-codec 25056 0 [snd-emu10k1] |> snd-mixer 24544 0 [snd-mixer-oss snd-emu10k1 |> snd-ac97-codec] |> snd-seq-device 3984 0 [snd-synth-emu10k1 snd-synth-emux |> snd-seq-midi snd-seq-oss snd-seq snd-card-emu10k1 snd-rawmidi] |> snd 35248 1 [snd-synth-emux snd-seq-virmidi |> snd-seq-midi snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss |> snd-pcm-plugin snd-mixer-oss snd-card-emu10k1 snd-emu10k1 snd-pcm |> snd-timer snd-rawmidi snd-emux-mem snd-ac97-codec snd-mixer |> snd-seq-device] |> soundcore 4208 9 [snd] |> parport_pc 20240 1 (autoclean) |> lp 5808 0 (autoclean) |> parport 24768 1 (autoclean) [parport_pc lp] |> nfsd 70464 0 (autoclean) |> lockd 51440 0 (autoclean) [nfs nfsd] |> sunrpc 66480 0 (autoclean) [nfs nfsd lockd] |> autofs4 9600 0 (autoclean) |> af_packet 12560 0 (autoclean) |> appletalk 21072 0 (autoclean) |> ipx 16640 15 (autoclean) |> ip_vs 62000 0 (autoclean) |> acquirewdt 1504 0 (unused) |> softdog 1584 0 (unused) |> usb-uhci 21232 0 (unused) |> usbcore 50752 1 [usb-uhci] |> 3c59x 25952 1 (autoclean) |> nls_iso8859-1 2880 1 (autoclean) |> nls_cp850 3632 1 (autoclean) |> vfat 9968 1 (autoclean) |> fat 32192 0 (autoclean) [vfat] |> tuner 4784 1 (autoclean) |> bttv 57200 0 (unused) |> i2c-algo-bit 7328 1 [bttv] |> i2c-core 13600 0 [tuner bttv i2c-algo-bit] |> videodev 5056 2 [bttv] |> ide-scsi 8096 0 |> scsi_mod 91072 1 [ide-scsi] |> rtc 5600 0 (autoclean) |> reiserfs 158304 2 |> |> This in turn means you did NOT load all of the required RPMs... |> |> Did you install ALL of the ALSA RPM's? |> |> Do you have "sound" being started as a service upon bootup? |> |> Did you COLD BOOT as I indicated, before configuring? |> |> Here is my /etc/modules.conf |> |> alias net-pf-4 ipx |> alias autofs autofs4 |> pre-install pcmcia_core CARDMGR_OPTS=-f |/etc/rc.d/init.d/pcmcia start |> alias usb-interface usb-uhci probeall scsi_hostadapter ide-scsi |> alias eth0 3c59x |> alias char-major-81 bttv |> alias char-major-195 NVdriver |> alias char-major-67 coda |> alias char-major-15 joydev |> alias char-major-116 snd |> alias char-major-14 soundcore |> alias snd-card-0 snd-card-emu10k1 |> alias sound-slot-0 snd-card-0 |> alias sound-service-0-0 snd-mixer-oss |> alias sound-service-0-1 snd-seq-oss |> alias sound-service-0-3 snd-pcm-oss |> alias sound-service-0-8 snd-seq-oss |> alias sound-service-0-12 snd-pcm-oss |> alias char-major-13 input |> above input joydev emu10k1-gp analog gameport |> |> I added the joystick options... |> |> -JMS
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com