Anyone able to get an IBM EtherJet PC Card working with Mandrake 8.1 and pcmcia-cs 3.1.31? I've read several different things on different web sites, and perhaps the first part of the problem is finding out exactly what solution I should be using for my specific card.
I tried looking into a PCMCIA driver for CS89x0-based cards (?) (http://www.first.gmd.de/~danilo/pc-driver/), but I couldn't get it to compile according to the instructions. My kernel is 2.4.16-11mdk and I'm using pcmcia-cs standalone instead of the kernel support. Below are entries from my syslog from when PCMCIA loads, and the output of dump_cis. I'm using a Micron TransPort Trek 2 laptop that otherwise runs Linux just fine. :) - Kathy ---------------------------------------------------- syslog: Jan 9 13:50:01 micron-kelt pcmcia: Starting PCMCIA services: Jan 9 13:50:01 micron-kelt pcmcia: modules Jan 9 13:50:01 micron-kelt pcmcia: cardmgr. Jan 9 13:50:01 micron-kelt cardmgr[789]: starting, version is 3.1.31 Jan 9 13:50:01 micron-kelt /etc/hotplug/usb.agent: ... no drivers for USB product 0/0/0 Jan 9 13:50:02 micron-kelt cardmgr[789]: unsupported card in socket 1 Jan 9 13:50:02 micron-kelt cardmgr[789]: manfid: 0x00a4, 0x003f function: 6 (network) Jan 9 13:50:02 micron-kelt rc: Starting pcmcia: succeeded dump_cis output Socket 0: no CIS present Socket 1: dev_info NULL 0ns, 512b vers_1 5.0, "IBM", "EtherJet PC Card", "Version U11", "Card Assy Part Number - 85H4801" manfid 0x00a4, 0x003f funcid network_adapter lan_technology ethernet lan_speed 10 mb/sec lan_media unshielded_twisted_pair lan_media thick_coax lan_node_id 48 0d 1a ac 04 00 lan_connector Closed connector standard config base 0x0400 mask 0x0017 last_index 0x01 cftable_entry 0x01 [default] [rdybsy] Vcc Vnom 5V Istatic 120mA Iavg 250mA timing wait 100ns ready 1205032704ns io 0x0000-0x000f [lines=4] [16bit] irq mask 0xffff [level] checksum 0x0000-0x008d = 0xd1
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com