can you send the exact error you get? In init doesn't even start then maybe the mount error is linux trying to mount the initrd image and it can't.
try passing this to your kernel: ramdisk=8192 On Fri, 2002-02-01 at 12:09, Kursad Kayaturk wrote: > Hi guys, > I have setup two thunder k7 before with mandrake 8.1 but now > I have great problems. The problem is this time I have used a scsi drive > Fujitsu MAN3367MP but the problem is I have parity errors and linux can > not read/write with installation cdrom. When I disconnect the harddisk > everthing is fine. The installation process has no errors. I select to > install smp, enterprise and the standard 2.4 kernels. Then the problem > starts the system boots with enterprise kernel I have a kernel panic > right after/while /dev mount the error is something like cannot reach > end of device. Filesystem used is XFS. I don't know the problem if you > can help me I will be pleased. The system can boot up with standard > kernel and work flawless. But I can use only about 8xx memory. Also do > anyone know that if enterprise kernel supports smp system or not. > > Regards, > Kursad Kayaturk > > This system is Dual XP1900+ > Tyan thunder k7 (onboard scsi adaptec 7889 > UW160, 2 onboard 3COM NICS) > 2GB memory > 36 GB Fujitsu MAN3367MP > 60 GB IBM IDE > 64 MB Geforce Ti -- Bryan Whitehead SysAdmin - JPL - Interferometry Systems and Technology Phone: 818 354 2903 [EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
