Brian Parish wrote: >After having followed the: > >What would cause system to just stop? > >thread I finally got around to getting sensors going on my main box. >The output I get is: > >eeprom-i2c-0-52 >Adapter: SMBus vt82c596 adapter at 5000 >Algorithm: Non-I2C SMBus adapter > >eeprom-i2c-0-53 >Adapter: SMBus vt82c596 adapter at 5000 >Algorithm: Non-I2C SMBus adapter > >via686a-isa-6000 >Adapter: ISA adapter >Algorithm: ISA algorithm >CPU core: +1.74 V (min = +1.79 V, max = +2.18 V) ALARM >+2.5V: +2.68 V (min = +0.00 V, max = +3.03 V) >I/O: +3.47 V (min = +3.03 V, max = +3.36 V) ALARM >+5V: +4.94 V (min = +4.60 V, max = +5.07 V) >+12V: +11.80 V (min = +11.03 V, max = +12.16 V) >CPU Fan: 0 RPM (min = 0 RPM, div = 2) >P/S Fan: 4560 RPM (min = 0 RPM, div = 2) ALARM >SYS Temp: +35.6°C (limit = +146°C, hysteresis = +50°C) >CPU Temp: +53.1°C (limit = +60°C, hysteresis = +50°C) >SBr Temp: +20.9°C (limit = +60°C, hysteresis = +50°C > > > >Now I'm not that worried by the CPU fan reading as I can assure you that >it's going a bit quicker than that, but the ALARMs are a bit - >well...alarming. Tom and/or Civileme and/or any other hardware heads - >any comments? The system is as follows: > >AMD 1600+ processor running at bog standard default settings >Abit KG7 mobo >Nice big heatsink, but just a thermal pad - no grease (built the system >before reading the "use grease" advice) >512MB DDR RAM >64Mb nVidia graphics card >Huge tower case but with only 2 fans in addition to the cpu and mobo >coolers - one in the front and the one in the power supply. > >The system is stable, but why should I let that worry me right? > >TIA >Brian > > It's normal. Should read CPU specs for voltages, the limits are usually wrong(at least on both systems on which I tested sensors). Here's what I get on the older one:
Adapter: SMBus PIIX4 adapter at 5000 Algorithm: Non-I2C SMBus adapter Memory type: SDRAM DIMM SPD SDRAM Size (MB): 128 w83781d-isa-0290 Adapter: ISA adapter Algorithm: ISA algorithm VCore 1: +2.72 V (min = +2.27 V, max = +2.52 V) ALARM VCore 2: +1.47 V (min = +2.27 V, max = +2.52 V) ALARM +3.3V: +3.45 V (min = +3.13 V, max = +3.45 V) +5V: +4.89 V (min = +4.72 V, max = +5.24 V) +12V: +12.01 V (min = +11.36 V, max = +12.58 V) -12V: -12.10 V (min = -11.33 V, max = -12.55 V) -5V: -4.86 V (min = -4.74 V, max = -5.24 V) ALARM fan1: 4963 RPM (min = 3000 RPM, div = 2) fan2: 0 RPM (min = 3000 RPM, div = 2) ALARM fan3: 0 RPM (min = 3000 RPM, div = 2) ALARM temp1: +28°C (limit = +60°C, hysteresis = +50°C) temp2: +32.0°C (limit = +60°C, hysteresis = +50°C) temp3: +33.0°C (limit = +60°C, hysteresis = +50°C) vid: +2.40 V The -5V gets as high as -4.71 from time to time, which is not perfect, but it works.
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
