On Monday 26 August 2002 01:16 pm, Joan Tur wrote: That happened to me also and I went back into boot config and the entry for hba was unchecked and as soon as i checked it back all worked fine.
> I've found the following problem when running lilo: > --------- > [root@quinipc etc]# lilo > Fatal: geo_comp_addr: Cylinder number is too big (4479 > 1023) > --------- > > Won't it be possible to choose what ide drives are to be scsi emulated -in > order for them to be used by the recording software- ? Of course it could > be under expert mode... > > I'm wondering that because I was changing my ide DVD to scsi-emulated O8-) > > Thanks. > > PD Here's my dmesg output: > ----------- > Uniform Multi-Platform E-IDE driver Revision: 6.31 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > VP_IDE: IDE controller on PCI bus 00 dev 39 > VP_IDE: chipset revision 6 > VP_IDE: not 100% native mode: will probe irqs later > VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 > ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:pio > PDC20265: IDE controller on PCI bus 00 dev 80 > PCI: Found IRQ 11 for device 00:10.0 > PCI: Sharing IRQ 11 with 00:07.2 > PCI: Sharing IRQ 11 with 00:07.3 > PDC20265: chipset revision 2 > PDC20265: not 100% native mode: will probe irqs later > PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. > ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:DMA, hdf:pio > ide3: BM-DMA at 0xe408-0xe40f, BIOS settings: hdg:DMA, hdh:pio > hda: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive > hdc: AOPEN CD-RW CRW3248 1.15 20020520, ATAPI CD/DVD-ROM drive > hde: ST340016A, ATA DISK drive > hdg: IC35L060AVVA07-0, ATA DISK drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > ide2 at 0xd400-0xd407,0xd802 on irq 11 > ide3 at 0xdc00-0xdc07,0xe002 on irq 11 > hde: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, > UDMA(100) hdg: 120103200 sectors (61493 MB) w/1863KiB Cache, > CHS=119150/16/63, UDMA(100) Partition check: > /dev/ide/host2/bus0/target0/lun0: [PTBL] [4865/255/63] p1 p2 < p5 p6 p7 p8 > > /dev/ide/host2/bus1/target0/lun0: p1 p2 < p5 p6 p7 p8 > > > -----------
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
