Hey All, Just spent the past week trying to configure my soundcard with no success. It's a SiS 7012 pci card in a laptop and I've tried getting it to work with the OSS i810_audio module, SiS's own release from their web site (caused a kernel panic)and alsa 0.9. All to no avail. I can insmod the i810_audio module fine, as you can see below from an extract of /var/log/messages but cat'ing all kinds of .au .wav and other files to /dev/dsp gives me nothing. I've checked the mixer levels and gmix loads fine and allows me to change the main volume and cd-volume but I can't read anything else. I have read Civileme's comments on this card and I've checked all kinds of stuff on the net but nothing seems to work which is why I'm asking here. Any advice gratefully received, I'm currently running Mandrake 8.2. Regards Dom Savage
___ Extract from /var/log/messages after insmod i810_audio ___ Sep 22 01:38:09 asterix kernel: Intel 810 + AC97 Audio, version 0.21, 03:22:49 Mar 15 2002 Sep 22 01:38:09 asterix kernel: SiS pirq: advanced IDE/ACPI/DAQ mapping not yet implemented Sep 22 01:38:09 asterix kernel: advanced SiS pirq mapping not yet implemented Sep 22 01:38:09 asterix kernel: i810: SiS 7012 found at IO 0xd800 and 0xdc00, IRQ 10 Sep 22 01:38:10 asterix kernel: i810_audio: Audio Controller supports 6 channels. Sep 22 01:38:10 asterix kernel: ac97_codec: AC97 Audio codec, id: 0x414c:0x4710 (ALC200/200P) Sep 22 01:38:10 asterix kernel: i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 Sep 22 01:38:10 asterix kernel: ac97_codec: AC97 Modem codec, id: 0x5349:0x4c22 (Silicon Laboratory Si3036)
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com