I'm having a similar problem with my generic USB Card Reader. I tried making some devices using MAKEDEV but that did not seem to work. The messages file shows that the kernel realizes the reader is there but not device was created to mount. I'm not sure if this affects anything but I am using ide-scsi emulation for two of my cdrom drives. Any advice? I'll be happy to provide more details on the problem if there's any interest.
Thanks,
Victor
Munagala Ramanath wrote:
Hi,
I'm trying to use my Fuji FinePix 2600Z camera. It works fine with 8.2:
When i plug it into the USB port, I get /dev/sda1 created and I can
mount it.
But on ML 9.0 no /dev/sd* devices get created; this is what I see in
the
logfile:
-----------------------------------------------------------------
Nov 29 14:33:05 abc kernel: hub.c: USB new device connect on bus1/2,
assigned device number 2
Nov 29 14:33:05 abc kernel: usb.c: USB device 2 (vend/prod 0x4cb/0x100)
is not
claimed by any active driver.
Nov 29 14:33:08 abc /etc/hotplug/usb.agent: Setup usb-storage
usb-storage for USB product 4cb/100/100
Nov 29 14:33:09 abc kernel: Initializing USB Mass Storage driver...
Nov 29 14:33:09 abc kernel: usb.c: registered new driver usb-storage
Nov 29 14:33:09 abc kernel: scsi1 : SCSI emulation for USB Mass Storage
devicesNov 29 14:33:09 abc kernel: Vendor: Fujifilm Model: FinePix
1400Zoom Rev: 0100
Nov 29 14:33:09 abc kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 29 14:33:09 abc kernel: USB Mass Storage support registered.
Nov 29 14:52:37 abc kernel: usb-uhci.c: interrupt, status 3, frame#
1024
-----------------------------------------------------------------
The same sort of thing happens when I plug in a USB card reader that
has
a SmartMedia card in it:
-----------------------------------------------------------------
Nov 29 22:00:05 abc kernel: hub.c: USB new device connect on bus1/2,
assigned device number 4
Nov 29 22:00:05 abc kernel: scsi2 : SCSI emulation for USB Mass Storage
devicesNov 29 22:00:05 abc kernel: usb-uhci.c: interrupt, status 4,
frame# 28
Nov 29 22:00:05 abc kernel: Vendor: General Model: Flash Disk Drive
Rev: 2.05
Nov 29 22:00:05 abc kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 29 22:00:09 abc /etc/hotplug/usb.agent: Setup usb-storage for USB
product 3538/1/205
-----------------------------------------------------------------
Again, no /dev/sd* devices created, so I'm not sure what to mount.
Any help is appreciated. Thanks.
Ram
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
------------------------------------------------------------------------
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
