On Thu, 13 Mar 2003 20:14:46 +0100 Oscar Santacreu <[EMAIL PROTECTED]> wrote:
> Hi all, > I need to setup a videoconference server, and I would like to use > openmcu. I have downloaded the software from http://www.openh323.org, > and I tried to run it in the server (linux mandrake 8.1) > But when I connect to server using gnomemeeting, in the server I can > read these messages: > ================= > [EMAIL PROTECTED] obj_linux_x86_r]$ ./openmcu -v -n > OpenMCU Version 1.1.7 by OpenH323 Project on Unix Linux > (2.4.8-34.1mdk-i686) Listening on port 1720 > Codecs (in preference order): > Table: > SpeexNarrow-8k{sw} <1> > SpeexNarrow-15k{sw} <2> > GSM-06.10{sw} <3> > MS-GSM{sw} <4> > G.711-uLaw-64k{sw} <5> > G.711-ALaw-64k{sw} <6> > LPC-10{sw} <7> > H.261-QCIF <8> > Set: > 0: > 0: > SpeexNarrow-8k{sw} <1> > SpeexNarrow-15k{sw} <2> > GSM-06.10{sw} <3> > MS-GSM{sw} <4> > G.711-uLaw-64k{sw} <5> > G.711-ALaw-64k{sw} <6> > LPC-10{sw} <7> > 1: > H.261-QCIF <8> > > Waiting for incoming calls for "OpenH323 MCU v1.1.7" > Command ? > Opening connection > Incoming H.323 call from Oscar Santacreu [xxx.xxx.xxx.64] has not > selected a room. > Using room room101 as the default. > Accepting call from Oscar Santacreu [xxx.xxx.xxx.64] using > gnomemeeting/0.96.1 (OpenH323 v1.11.2) with room id room101 > Member ip$xxx.xxx.xxx.64:30008/15143 will not hear their own voice > Started logical channel: sending SpeexNarrow-8k{sw} <2> > Started logical channel: sending H.261-QCIF <9> > Started logical channel: receiving SpeexNarrow-8k{sw} <1> > Started logical channel: receiving H.261-QCIF <8> > ================= > > But I can't see the remote image with gnomemeeting (maybe the server is > not sending video signal?). > When I disconnect, the server shows these messages: > > ================ > Room room101 is now empty > ROOM HAS BEEN REMOVED (ReadVideo) > Closing connection > ================ > > When a friend connects to server with Ms Netmeeting the server shows > these messages: > > ================ > Opening connection > Incoming H.323 call from antonio [xxx.xxx.xxx.63] has not selected a > room. Using room room101 as the default. > Accepting call from antonio [xxx.xxx.xxx.63] using Microsoft® > NetMeeting®/3.0 with room id room101 > Adding member ip$xxx.xxx.xxx.63:1138/11841 to list of > ip$xxx.xxx.xxx.64:30000/15144 > Adding audio buffer for ip$xxx.xxx.xxx.63:1138/11841 to connection > ip$xxx.xxx.xxx.64:30000/15144 > Adding audio buffer for ip$xxx.xxx.xxx.64:30000/15144 to connection > ip$xxx.xxx.xxx.63:1138/11841 > Member ip$xxx.xxx.xxx.63:1138/11841 will not hear their own voice > =========================== > > But netmeeting is always waiting for a response, and never starts > videoconferencing. Then, the server shows: > > ========================== > Removing audio buffer for ip$xxx.xxx.xxx.63:1138/11841 from connection > ip$xxx.xxx.xxx.64:30000/15144 > Removing audio buffer for ip$xxx.xxx.xxx.64:30000/15144 from connection > ip$xxx.xxx.xxx.63:1138/11841 > Closing connection > ========================= > > While neetmeeting still waits for a response. In my computer, with > gnomemeeting, I still can't see anything! > > I can't find anything in google about configuring openmcu under linux > and clients under linux and windows. I really need to setup the > videoconference server as soon as possible. > > Anybody can help me? Where can I find the documentation about openmcu? I only ever used audio on openmcu -- see http://pfortin.com/Linux/openmcu/ -- so can't comment on video other than to point out port 1720 conflict with audio... Got most help at http://www.openh323.org/ > Thank you! > Best regards!
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
