You may also have a net mask wrong on one of the units. A little more info would be helpful. From a term screen type the command ifconfig and paste the info you get as well as thje results from the route -n command to the email.
Make sure your link lights are on for both the gateway, pc, and switch/hub. Like Kwan says you may have a bad or incorrect cable. On Star Date Thursday 16 October 2003 06:06 pm, Kwan Lowe sent this sub-space message. > > When I apply this IP using the wizard on install it all takes and seems > > to be there .. If I try and ping anything on the LAN I get destination > > unreachable, and if I ping the unit from another machine on the LAN it > > times out. But from the 9.1 machine, I can ping 192.168.0.200 (it's NIC > > ip) .. the routing table sees the ip, but wont look at the gateway or > > LAN. . > > Sounds suspiciously like a bad cable/connection. Can you try switching the > cable to a known-good and plugging into a know-good port on the hub or > switch?
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
