Greetings, Type ` ls /usr/local/bin/faust2*`, and you should see, in particular,
faust2faustvst faust2juce There is also faust2au, but it needs updating. Probably the fastest path to AU these days is via faust2juce. If possible, consider going with faust2lv2. - Julius On Sat, Dec 15, 2018 at 8:57 PM Chris Share via Faudiostream-users <faudiostream-users@lists.sourceforge.net> wrote: > > Hi, > > I'm a musician/music producer. I've also worked as a C/C++ programmer. > > I'm interested in Faust, mainly for developing VST/AU plug-ins on OS X. > > However, I'm a bit unclear as to how to get started. > > I've dowloaded and installed the Faust compiler using the following: > > git clone https://github.com/grame-cncm/faust.git > cd faust > git submodule update --init > > make > sudo make install > > Faust is appearing in my terminal so all's good there. > > I've also downloaded FaustWorks (as a binary) however I don't see anywhere in > the app that produces any sort of output. If I wan't to create an VST or AU > plug-in how do I do it? > > I've looked through the documentation but can't find much releated to this. > Also, I've seen that there's been some interaction with JUCE. Are plug-ins > now created via JUCE? > > Cheers, > > Chris > > > _______________________________________________ > Faudiostream-users mailing list > Faudiostream-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/faudiostream-users -- Julius O. Smith III <j...@ccrma.stanford.edu> Professor of Music and, by courtesy, Electrical Engineering CCRMA, Stanford University http://ccrma.stanford.edu/~jos/ _______________________________________________ Faudiostream-users mailing list Faudiostream-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/faudiostream-users
