Many years ago I experimented with F0-following using autocorrelation (like
SuperCollider's Pitch function).  I got it to work in simple cases but did
not push it very far.  See attached.  I also attach one by Nicolas
Gravillon that I don't remember any details about.

Cheers,
Julius

On Mon, Aug 31, 2026 at 1:39 PM ga <[email protected]> wrote:

> I didnt get it work with hilbert and pospass ( cause I dont understand
> either ),
> so I used allpass chains with coefficients by Oli Niemital ( I think).
>
> I also made a version with heterodyne filtering, but the response gets too
> long,
> it seems you need a cutoff < 3 hz (?)
>
> I got something that works, but its quite sluggish, and prefers lower
> notes.
>  BUT it works with polyphonic input, which is amazing to me
>
> Mabye someone has ideas how to improve it, the best place to start may be
> the integrations which are home baked.
>
> It works like this
> adaptive bandpass -> hilbertt transform > phase difference
> this goes to a refernce oscillator, whos pitch is compared and updated
> similar to phase locked loop but in pitch
>
>
>
> and sorry, I dont know how to send unformatted plain text from gmail nor
> how to respond so
> that the list topics sty intact 8 but I try)
>
>
> // frequency tracker test 9f
> //
>
> import("stdfaust.lib");
>
> drywet = (hslider("[1]DryWet[style:knob]", 0.71, 0, 1, 0.01)) ;
>
> filterS = (hslider("[2]filer samples[style:knob]", 20, 2, 48, 1)) ;
> filterF = (hslider("[3]filter F[style:knob]", 3, 0.5, 20, 0.5)) ;
>
> //readout = hbargraph("[5]f [style:numerical]", 0, 1);
>
> freqtrack(x) = 
> (_,x:prefilt:track)~_:_,(x@(filterS*2)<:_,_:*:an.amp_follower_ar(1/8,
> 1/8):max(0):sqrt)
>         with {
>                 fwmin =  27.5 / ma.SR;     // min. frequency
>                 fwmax = 3520 / ma.SR;   // max. frequency
>
>                 octave = 1;
>
>                 prefilt(fw, x) = x:fi.svf.hp( fwmin * ma.SR,
> 0.707):fi.svf.lp( fwmax * ma.SR, 0.707):
>                                 bfilt4(fw/octave):hil;
>
>                 bfilt4( fw, x) = x: fi.svf.lp(fw*ma.SR*0.7, 0.541):
> fi.svf.lp(fw*ma.SR*0.7, 1.307):
>                                 fi.svf.hp(fw*ma.SR*1.19, 0.541):
> fi.svf.hp(fw*ma.SR *1.19, 1.307);
>                 bfilt6( fw, x) = x<:
>                 fi.svf.hp(fw*ma.SR*1.19, 0.518): fi.svf.hp(fw*ma.SR *1.19,
> 0.707): fi.svf.hp(fw*ma.SR *1.19, 1.932):
>                 fi.svf.lp(fw*ma.SR*0.7, 0.518): fi.svf.lp(fw*ma.SR*0.7,
> 0.707): fi.svf.lp(fw*ma.SR*0.7, 1.932);
>
>                 hil(x) = x<:
>                         fi.allpassn1m(4, ( 0.6923878, 0.9360654323,
>  0.9882295227, 0.9987488453)),
>                         fi.allpassn1m(4, ( 0.4021921162, 0.8561710882,
>  0.9722909546, 0.9952884791));
>
>                 track( x, y) = (x,y,_:wtrack)~_
>                     with{
>                          wtrack(x, y, fw) = (y,x:norm:qatan2:diph),
> (fw:phacc:diph):
>                                     w2p,(w2p
> <:_,_):_-_,_:(integ(filterS):integ(filterS)),_:+:p2w:
>                                     max(fwmin, min(fwmax, _)):
>
>                                     integ(filterS):
>                                     _;
>
>                         norm( x, y) =  x * x, y * y: +: sqrt:max(
> 1e-7):0.5/_<: _ *x,_*y;
>                         integ(del, x) =
> x<:_,_@del:_,_*tresp(del):-:lpw(avat)
>                                 with{
>                                         avat = filterF/ ma.SR;
>                                         tresp( smp) = ma.E^(- 2*ma.PI *
> avat) <:_,_:1-_,_^del: * ;
>                                 };
>                         reff = 440;
>                         // fw to pitch  ref. 440 hz
>                         w2p( w) = w*(ma.SR/reff):max(1e-12):ma.log2:_+12;
>                         // pitch to w ref 440 hz
>                         p2w( po) =
> po*(1/12):2^_:_*(reff/ma.SR):min(ma.SR/4);
>                         // freq ratio a / b
>                         ffab( fw1, fw2) = (fw1:max( 0.0004)) / (fw2:max(
> 0.0004)) ;
>                         // delta pitch octave to freq. ratio
>                         dpo2ff( dpo) = dpo:min(12):2^_;
>                     };
>
>                 // phase accumulation
>                 phacc( dph) = dph: mphasor;
>                 // approx. atan2 , normalized output -0.5...0.5
>                 qatan2(y, x) = ba.if(x > 0, qatn(y, x), (ba.if(y > 0 ,
> qatn(y, x) + 0.5, qatn(y, x) - 0.5))):
>                                 max(-0.5, min( 0.5, _))
>                         with{
>                                 qatn(y, x) = y,(ba.if(x>0, x +  1e-14 ,
> x-1e-14) ):
>                                  _/ _: _<:_,_,_:_,(_*_<:_,_):_*(1-_ *(
> (1/3-0.2*_)));
>                             };
>                 atan2n(y, x) = y, x: ba.if( x != 0, atan2, 0):_/(2*ma.PI);
>
>                 // wraps between -0.5..0.5
>                 wrap(x) = x-( floor( x +0.5)) ;
>                 // unwraps delta phase
>                 uwr1(dw) = dw:ba.if( dw< -0.25, dw- (dw'+dw) , _):  ba.if(
> dw> 0.25, dw + (dw'-dw), _);
>                 // phase difference
>                 diph(ph) = ph <:_,_':-:uwr1;
>                 // approx sine -0.5...0.5
>                 qsin(x) = x+(0.5): wrap <:
> (abs:-(0.25):qsincurve),_:ma.copysign
>                     with { qsincurve(x) = 1 - ( (x*x)<:
> *(1.2253517*16),(_<:*:* (-3.60562732*16)):>_ );};
>                 // phasor / accumulator -0.5...0.5
>                 mphasor(fw) = (+(fw) :(wrap))~_;
>                 lpw( fw, x)= x : fi.pole(lpp)*(1-lpp)
>                     with {  lpp = ma.E^(- 2*ma.PI * fw); };
>
>             };
>
> testsaw(fw, amp) = os.saw2( fw * ma.SR ) : fi.svf.lp(700, 0.707)*amp;
> //readout
> process = +: _<:_*(1-drywet)@(filterS*2), (freqtrack<:testsaw) * drywet
> :>_ <:_,_ ;
> _______________________________________________
> Faudiostream-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/faudiostream-users
>


-- 
AI has taken my job, but only I know what it is.

Attachment: acor.dsp
Description: Binary data

Attachment: acor3.dsp
Description: Binary data

_______________________________________________
Faudiostream-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/faudiostream-users

Reply via email to