Properly use inttypes when printing 64bit values.
Signed-off-by: Hannes Reinecke <[email protected]>
---
fcoeadm_display.c | 4 ++--
fcoemon.c | 2 +-
fcping.c | 11 ++++++-----
3 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/fcoeadm_display.c b/fcoeadm_display.c
index 287e370..9b96aa7 100644
--- a/fcoeadm_display.c
+++ b/fcoeadm_display.c
@@ -1417,8 +1417,8 @@ static void print_fcoe_fcf_device(void *ep, UNUSED void
*arg)
if (!buf)
buf = temp;
printf(" Connection Mode: %s\n", buf);
- printf(" Fabric Name: 0x%016lx\n", fcf->fabric_name);
- printf(" Switch Name 0x%016lx\n", fcf->switch_name);
+ printf(" Fabric Name: 0x%016" PRIx64 "\n",
fcf->fabric_name);
+ printf(" Switch Name 0x%016" PRIx64 "\n",
fcf->switch_name);
mac2str(fcf->mac, mac, MAX_STR_LEN);
printf(" MAC Address: %s\n", mac);
printf(" FCF Priority: %u\n", fcf->priority);
diff --git a/fcoemon.c b/fcoemon.c
index a5babfa..be4c74d 100644
--- a/fcoemon.c
+++ b/fcoemon.c
@@ -2637,7 +2637,7 @@ static void fcm_dcbd_get_oper(struct fcm_netif *ff, char
*resp, char *cp)
if (ep) {
FCM_LOG_DEV(ff, "Invalid get oper response "
- "parse error byte %ld, resp %s", ep - cp, cp);
+ "parse error byte %td, resp %s", ep - cp, cp);
fcm_dcbd_state_set(ff, FCD_ERROR);
} else {
if (val && fcoe_config.debug)
diff --git a/fcping.c b/fcping.c
index c6f74a6..399b778 100644
--- a/fcping.c
+++ b/fcping.c
@@ -25,6 +25,7 @@
#include <stddef.h>
#include <stdarg.h>
#include <unistd.h>
+#include <inttypes.h>
#include <errno.h>
#include <string.h>
#include <time.h>
@@ -810,17 +811,17 @@ static void fp_check_data_len(void)
printf("Maximum ECHO data allowed by the Fabric (0x%06x) : %d bytes.\n"
"Maximum ECHO data allowed by the Source (0x%06x) : %d bytes.\n"
"Maximum ECHO data allowed by the Target (0x%06x) : %d bytes.\n"
- "Maximum ECHO data requested from user input (-s) : %lu "
+ "Maximum ECHO data requested from user input (-s) : %" PRIu32 " "
"(default %d) bytes.\n",
FC_WKA_FABRIC_CONTROLLER, flen, sid, slen, fp_did, dlen,
- fp_len - FP_LEN_ECHO, FP_LEN_DEF);
+ (uint32_t)(fp_len - FP_LEN_ECHO), FP_LEN_DEF);
/* fp_len is the total payload, including 4 bytes for ECHO command */
fp_len = MIN(fp_len, plen + FP_LEN_ECHO);
- printf("Actual FC ELS ECHO data size used : %lu bytes.\n"
+ printf("Actual FC ELS ECHO data size used : %" PRIu32 " bytes.\n"
"Actual FC ELS ECHO payload size used : %d bytes "
- "(including %ld bytes ECHO command).\n",
- fp_len - FP_LEN_ECHO, fp_len, FP_LEN_ECHO);
+ "(including %zu bytes ECHO command).\n",
+ (uint32_t)(fp_len - FP_LEN_ECHO), fp_len, FP_LEN_ECHO);
}
/*
--
1.8.1.4
_______________________________________________
fcoe-devel mailing list
[email protected]
http://lists.open-fcoe.org/mailman/listinfo/fcoe-devel
