Greetings; This somewhat FC2 box has been keeping time quite well since I finally managed to get the ntpd daemon working, and worked quite well up thru kernel 2.6.13-rc5.
At 2.6.13-rc6, and now for 2.6.13.1, time synch is not being done and the time drifts several minutes a day. I've rebuilt 2.6.13.1 using the 2.6.13-rc5 .config after a make oldconfig. I'm not sure if that might fix it, but I found a vulnerability notice for versions earlier than 4.2.0b, so I've also been playing with both that, and the version pf 4.2.0a as patched for FC3. This latter version does not seem to be writing to /var/log/ntpd.log at all, so I have no idea what its doing. So I built it from the tarball for ntp-dev-4.2.0b, (./configure --prefix=/usr, so it would overwrite the rpm install) and its still not writing to /var/log/ntpd.log. But at least ntpstat says its approaching sync, as in: [EMAIL PROTECTED] ntp-dev-4.2.0b-20050827]# ntpstat synchronised to NTP server (64.5.1.129) at stratum 3 time correct to within 41 ms polling server every 64 s This is while booted to 2.6.13-rc5, which was known to work with the older, version 4.1.1 ntpd. Now I'm going to reboot to a 2.6.13.1 made from the 2.6.13-rc5 & a make oldconfig and see if that will work. It didn't, sync was to the local ntp server only. Nobody on the kernel list seems to be having this problem with post 2.6.13-rc5 kernels, which is why I'm posting here on the legacy list. So I've now turned on some IpSec stuff in the .config, and rebuilt it again. And, 10 minutes after rebooting to this 2.6.13.1 build, there is still no logging, and ntpstat is telling me this: [EMAIL PROTECTED] ntp-dev-4.2.0b-20050827]# ntpstat synchronised to NTP server (64.5.1.130) at stratum 3 time correct to within 483 ms polling server every 64 s Which is the first time its admitted using an non-local time src when booted to 2.6.13-rc6 or 2.6.13.1, so maybe I've got it. I turned on some IpSec stuff in the .config this time. Comments anybody? As in when did it become a requirement to have IpSec stuff enabled (if indeed thats what fixed it) before ntpd would run? No firewall on this box, its on another box & no changes have been made there in many months. And, secondarily, why is there no logging now so that I have to query it with ntpstat to see if its running right? This is with [EMAIL PROTECTED] ntp-dev-4.2.0b-20050827]# ntpd --version ntpd: ntpd [EMAIL PROTECTED] Mon Sep 19 13:24:39 UTC 2005 (1) installed from the tarball, and the older /etc/ntp/keys and /etc/ntp/step-tickers from an .rpmsave rewritten over the FC3 installed versions. -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) 99.35% setiathome rank, not too shabby for a WV hillbilly Yahoo.com and AOL/TW attorneys please note, additions to the above message by Gene Heskett are: Copyright 2005 by Maurice Eugene Heskett, all rights reserved. -- fedora-legacy-list mailing list fedora-legacy-list@redhat.com https://www.redhat.com/mailman/listinfo/fedora-legacy-list