Robert L Cochran wrote:
And the output of `ls /dev/mapper`
Charles Crayne wrote:
On Mon, 15 Dec 2008 22:09:44 -0500
"Raymond C. Rodgers" <sinful...@gmail.com> wrote:
From what I've seen, this can be done through initrd/mkinitrd some
how,
Apparently, I don't understand what you are trying to do. I am running
software raid on three i386 machines and one x86_64 machine, and I have
never needed any magic.
Perhaps if you posted your fstab, and the output of parted -l, I would
understand your problem well enough to offer some useful advice.
*fstab:*
UUID=b601345c-1a2f-464a-ab3d-9a25d528df8d /
ext3 defaults 1 1
UUID=9f0b2cc8-7c0e-49f6-8366-483af19fca89 /boot
ext3 defaults 1 2
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
UUID=d4c09963-7244-413b-9d85-26ad476b66d6 swap
swap defaults 0 0
/dev/VolGroup00/LogVol01 swap swap defaults 0 0
/dev/sdc1 /media/prime ntfs-3g defaults 0 0
/dev/mapper/nvidia_gdedfbbjp5 /media/safehouse ntfs-3g defaults 0 0
//192.168.0.107/share /media/linkstation cifs
users,gid=users,file_mode=0666,dir_mode=0777 0 0
//192.168.0.107/sharedmedia /media/linkstation_media cifs
users,gid=users,file_mode=0666,dir_mode=0777 0 0
*/dev/mapper before activating dmraid manually:*
[r...@localhost etc]# ls -l /dev/mapper/
total 0
crw-rw---- 1 root root 10, 63 2008-12-16 03:31 control
brw-rw---- 1 root disk 253, 0 2008-12-16 08:31 VolGroup00-LogVol00
brw-rw---- 1 root disk 253, 1 2008-12-16 03:31 VolGroup00-LogVol01
*/dev/mapper after activating dmraid manually (with the command line
I've been using since installing F10)*
[r...@localhost etc]# dmraid -a yes nvidia_gdedfbbj
RAID set "nvidia_gdedfbbj" was activated
RAID set "nvidia_gdedfbbjp2" was activated
RAID set "nvidia_gdedfbbjp5" was activated
[r...@localhost etc]# ls -l /dev/mapper/
total 0
crw-rw---- 1 root root 10, 63 2008-12-16 03:31 control
brw-rw---- 1 root disk 253, 2 2008-12-16 11:16 nvidia_gdedfbbj
brw-rw---- 1 root disk 253, 3 2008-12-16 11:16 nvidia_gdedfbbjp2
brw-rw---- 1 root disk 253, 4 2008-12-16 11:16 nvidia_gdedfbbjp5
brw-rw---- 1 root disk 253, 0 2008-12-16 08:31 VolGroup00-LogVol00
brw-rw---- 1 root disk 253, 1 2008-12-16 03:31 VolGroup00-LogVol01
The goal is to get dmraid activated automatically on boot like it once
was, and not need to manually activate it and mount the
nvidia_gdedfbbjp5 partition. As you might notice from the fstab, the
individual partitions that make up nvidia_gdedfbbjp5 are not listed in
the fstab file, yet Fedora is mounting them automatically everytime I
boot. From what I learned in the past, that may be related to how the
F10 installer saw the machine configured during installation, it decided
to build an initrd with them mounted individually. From what I recall
from F8 or F9, I had to use mkinitrd with dmraid activated and the
nvidia_gdedfbbjp5 device mounted to get it to behave the same way; there
was no need to modify /etc/fstab. But I have not been able to duplicate
that, nor have I been able to find the instructions that I used previously.
Raymond
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines