Hi,
I recently moved from Slackware to FC10. I previously noted that an old
harddisk and cdrom weren't recognized during boot. Now however, due to unknown
changes, my FC10 root disk isn't recognized. boot ends with the messages:
setuproot: moving /dev failed: No such file or directory
setuproot: error mounting /proc: No such file or directory
setuproot: error mounting /sys: No such file or directory
Mount failed for selinuxfs on /selinux: No such file or directory
Switching to new root and running init.
ERROR opening /dev/console
[and a line about attemting to use /dev/fd0 (floppy), which I don't have]
I scrolled up and noted that the order in which disks are recognized during
boot was changed and that the old harddisk is recognized, but the disk
contining FC's root is not. I have a PDC20268 ide controller. I think /dev/hdg
and /dev/hdh are connected (see table below), as well as the cdrom. I can boot
slackware or FC10 with my livecd and files are ok. See my `fdisk -l' output
below.
Slackware FC10-previously FC10fail (as observed in log)
/dev/hdb /dev/sdc not found
/dev/hdf not found /dev/sda
/dev/hdg /dev/sda /dev/sdb
/dev/hdh /dev/sdb /dev/sdc
I tried making an initrd:
mount --bind /mnt/fedora/lib/modules/2.6.27.24-170.2.68.fc10.i686.PAE
/lib/modules/2.6.27.24-170.2.68.fc10.i686.PAE
mkinitrd --with=scsi_wait_scan --with=pata_pdc2027x
/boot/initrd-2.6.27.24-170.2.68.fc10.i686.PAE.img -k
2.6.27.24-170.2.68.fc10.i686.PAE
`scsi_wait_scan' because I also noticed previously long stalls during boot,
I am not sure how to resolve this. Does anybody have an idea?
Thanks for reading,
Roel Kluin
in Slackware fdisk -l shows me:
Disk /dev/hdb: 40.9 GB, 40982151168 bytes
255 heads, 63 sectors/track, 4982 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: xxxxxxxxxxxxxxx
Device Boot Start End Blocks Id System
/dev/hdb1 * 1 1287 10337796 83 Linux
/dev/hdb2 1288 4982 29680087+ f W95 Ext'd (LBA)
/dev/hdb5 1288 1294 56196 83 Linux
/dev/hdb6 1295 3309 16185456 83 Linux
/dev/hdb7 3310 4982 13438341 83 Linux
Disk /dev/hdf: 10.2 GB, 10245537792 bytes
255 heads, 63 sectors/track, 1245 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: xxxxxxxxxxxxxxx
Device Boot Start End Blocks Id System
/dev/hdf1 * 1 1245 10000431 83 Linux
Disk /dev/hdg: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: xxxxxxxxxxxxxxx
Device Boot Start End Blocks Id System
/dev/hdg1 * 1 2554 20514973+ 83 Linux
/dev/hdg4 2555 14593 96703267+ f W95 Ext'd (LBA)
/dev/hdg5 4752 6083 10699258+ 83 Linux
/dev/hdg6 6084 6721 5124703+ 83 Linux
/dev/hdg7 6722 14593 63231808+ 83 Linux
/dev/hdg8 3997 4751 6064506 83 Linux
/dev/hdg9 2555 3996 11582833+ 83 Linux
Partition table entries are not in disk order
Disk /dev/hdh: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: xxxxxxxxxxxxxxx
Device Boot Start End Blocks Id System
/dev/hdh1 1 2433 19543041 c W95 FAT32 (LBA)
/dev/hdh2 2434 4866 19543072+ c W95 FAT32 (LBA)
/dev/hdh3 4867 7298 19535040 c W95 FAT32 (LBA)
/dev/hdh4 7299 9729 19527007+ 7 HPFS/NTFS
lspci -v shows:
01:08.0 Mass storage controller: Promise Technology, Inc. PDC20268 (Ultra100
TX2) (rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc. Ultra100TX2
Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 19
I/O ports at cc00 [size=8]
I/O ports at c880 [size=4]
I/O ports at c800 [size=8]
I/O ports at c480 [size=4]
I/O ports at c400 [size=16]
Memory at fbefc000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at f0000000 [disabled] [size=16K]
Capabilities: [60] Power Management version 1
Kernel driver in use: Promise_IDE
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
