Hi Mikkel; Still no sound.
On Sat, 2009-07-25 at 13:30 -0500, Mikkel L. Ellertson wrote: > William Case wrote: > > Hi Mikkel; > > > > There is probably no need to reply to this post -- unless you see > > something obviously wrong. I am just posting to get the results on the > > record -- so to speak. > > > OK - I have F11 in a virtual machine now, so I can play with the > differences while still having my normal setup running. To get a > list of the control names to use, you have to tell amixer to use > card 0, instead of the default. The default gives you the pulse > audio controls. Try: > > amixer -c 0 controls > > or > > amixer -c 0 scontrols > > and see if that works better. To get a clean start by first getting tvtime working with ALSA alone, I removed PulseAudio, rebooted and ran: ]$ amixer controls and amixer -c 0 controls ]$ amixer scontrols and amixer -c 0 scontrols (just for to see) On both (to be expected) I got: Simple mixer control 'Master',0 -yes numid=38 Simple mixer control 'Headphone',0 -err Simple mixer control 'PCM',0 -err mute not implemented Simple mixer control 'Front',0 -yes numid=19 Simple mixer control 'Front Mic',0 -err Simple mixer control 'Front Mic Boost',0 -err Simple mixer control 'Surround',0 -yes numid=3 Simple mixer control 'Center',0 -yes numid=5 Simple mixer control 'LFE',0 -yes numid=6 Simple mixer control 'Side',0 -yes numid=9 Simple mixer control 'Line',0 -yes numid=14 -- the best/ but no sound Simple mixer control 'CD',0 -yes numid=12 Simple mixer control 'Mic',0 -err Simple mixer control 'Mic Boost',0 -err Simple mixer control 'IEC958',0 -err Simple mixer control 'IEC958 Default PCM',0 -err Simple mixer control 'PC Speaker',0 -yes numid=22 Simple mixer control 'Capture',0 -err Simple mixer control 'Capture',1 -err Simple mixer control 'Channel Mode',0 -err Simple mixer control 'Input Source',0 -err Simple mixer control 'Input Source',1 -err I then tried each simple mixer control with tvtime. ]$ tvtime --mixer=hw0:'Control Name' returned " mixer: attach error: No such file or directory mixer: Can't open mixer hw0:Line, mixer volume and mute unavailable. mixer: Can't open device hw0, mixer volume and mute unavailable." I then opened Advance Volume Control; set everyone of the controls listed by amixer scontrols to unmute 100% (see list above) and tried that. Next I tried each control individually or in combination according to its numid. ]$ tvtime --mixer=default/'Control Name' opened tvtime and made the volume keyes (+/-) functional. This is the opposite of what happened with PulseAudio installed. On the list above, I have marked each 'Control Name' with a -yes if no error was returned and -err if there was an error. See example below. " $ tvtime --mixer=default/Speaker Running tvtime 1.0.2. Reading configuration from /etc/tvtime/tvtime.xml Reading configuration from /home/bill/.tvtime/tvtime.xml mixer: find error: Success mixer: Can't open mixer default, mixer volume and mute unavailable. mixer: Can't open device default/Speaker, mixer volume and mute unavailable. Thank you for using tvtime." In every case, there was no sound. -- Regards Bill Fedora 11, Gnome 2.26.3 Evo.2.26.3, Emacs 22.3.1 -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
