On Sat, Aug 07, 2021 at 08:02:05PM +0200, Marton Balint wrote: > > > On Fri, 6 Aug 2021, lance.lmw...@gmail.com wrote: > > > From: Limin Wang <lance.lmw...@gmail.com> > > > > Signed-off-by: Limin Wang <lance.lmw...@gmail.com> > > --- > > doc/indevs.texi | 16 +++++++++++++++- > > doc/outdevs.texi | 16 +++++++++++++++- > > libavdevice/decklink_common.cpp | 8 ++++++++ > > libavdevice/decklink_common.h | 11 +++++++++++ > > libavdevice/decklink_dec_c.c | 10 ++++++++++ > > libavdevice/decklink_enc_c.c | 10 ++++++++++ > > 6 files changed, 69 insertions(+), 2 deletions(-) > > > > diff --git a/doc/indevs.texi b/doc/indevs.texi > > index b377924..af0380a 100644 > > --- a/doc/indevs.texi > > +++ b/doc/indevs.texi > > @@ -344,9 +344,23 @@ Defines number of audio channels to capture. Must be > > @samp{2}, @samp{8} or @samp > > Defaults to @samp{2}. > > > > @item duplex_mode > > -Sets the decklink device duplex mode. Must be @samp{unset}, @samp{half} or > > @samp{full}. > > +Sets the decklink device duplex/profile mode. Must be @samp{unset}, > > @samp{half}, @samp{full}, > > +@samp{one_sub_device_full}, @samp{one_sub_device_half}, > > @samp{two_sub_device_full}, > > +@samp{four_sub_device_half} > > Defaults to @samp{unset}. > > > > +Note: DeckLink SDK 11.2 have replaced the duplex property by a profile > > property. > > Why do you think it is 11.2? Accoring to the docs, it was changed in 11.0, > and original code also had #defines for it and checked for 11.0 not 11.2. > But your defines below check 11.2 when in fact they should check 11.0. Or am > I missing something?
Sorry, it's my fault, when upgrade the sdk before, we use 11.2 and haven't use 11.0. I'll change to use 11.0. > > Thanks, > Marton > > > +For the DeckLink Duo 2 and DeckLink Quad 2, a profile is shared between > > any 2 > > +sub-devices that utilize the same connectors. For the DeckLink 8K Pro, a > > profile > > +is shared between all 4 sub-devices. So DeckLink 8K Pro support four > > profiles. > > + > > +Valid profile mode for DeckLink 8K Pro(Updated DeckLink SDK to >= 11.2): > > +@samp{one_sub_device_full}, @samp{one_sub_device_half}, > > @samp{two_sub_device_full}, > > +@samp{four_sub_device_half} > > + > > +Valid profile mode for DeckLink Quad 2 and DeckLink Duo 2: > > +@samp{half}, @samp{full} > > + > > @item timecode_format > > Timecode type to include in the frame and video stream metadata. Must be > > @samp{none}, @samp{rp188vitc}, @samp{rp188vitc2}, @samp{rp188ltc}, > > diff --git a/doc/outdevs.texi b/doc/outdevs.texi > > index dee9de3..76a9d7d 100644 > > --- a/doc/outdevs.texi > > +++ b/doc/outdevs.texi > > @@ -198,9 +198,23 @@ Amount of time to preroll video in seconds. > > Defaults to @option{0.5}. > > > > @item duplex_mode > > -Sets the decklink device duplex mode. Must be @samp{unset}, @samp{half} or > > @samp{full}. > > +Sets the decklink device duplex/profile mode. Must be @samp{unset}, > > @samp{half}, @samp{full}, > > +@samp{one_sub_device_full}, @samp{one_sub_device_half}, > > @samp{two_sub_device_full}, > > +@samp{four_sub_device_half} > > Defaults to @samp{unset}. > > > > +Note: DeckLink SDK 11.2 have replaced the duplex property by a profile > > property. > > +For the DeckLink Duo 2 and DeckLink Quad 2, a profile is shared between > > any 2 > > +sub-devices that utilize the same connectors. For the DeckLink 8K Pro, a > > profile > > +is shared between all 4 sub-devices. So DeckLink 8K Pro support four > > profiles. > > + > > +Valid profile mode for DeckLink 8K Pro(Updated DeckLink SDK to >= 11.2): > > +@samp{one_sub_device_full}, @samp{one_sub_device_half}, > > @samp{two_sub_device_full}, > > +@samp{four_sub_device_half} > > + > > +Valid profile mode for DeckLink Quad 2 and DeckLink Duo 2: > > +@samp{half}, @samp{full} > > + > > @item timing_offset > > Sets the genlock timing pixel offset on the used output. > > Defaults to @samp{unset}. > > diff --git a/libavdevice/decklink_common.cpp > > b/libavdevice/decklink_common.cpp > > index 46e9768..de7d2f4 100644 > > --- a/libavdevice/decklink_common.cpp > > +++ b/libavdevice/decklink_common.cpp > > @@ -182,7 +182,11 @@ int ff_decklink_set_configs(AVFormatContext *avctx, > > if (duplex_supported) { > > #if BLACKMAGIC_DECKLINK_API_VERSION >= 0x0b000000 > > IDeckLinkProfile *profile = NULL; > > +#if BLACKMAGIC_DECKLINK_API_VERSION >= 0x0b020000 > > + BMDProfileID bmd_profile_id = > > decklink_profile_id_map[ctx->duplex_mode]; > > +#else > > BMDProfileID bmd_profile_id = ctx->duplex_mode == 2 ? > > bmdProfileOneSubDeviceFullDuplex : bmdProfileTwoSubDevicesHalfDuplex; > > +#endif > > res = manager->GetProfile(bmd_profile_id, &profile); > > if (res == S_OK) { > > res = profile->SetActive(); > > @@ -195,7 +199,11 @@ int ff_decklink_set_configs(AVFormatContext *avctx, > > if (res != S_OK) > > av_log(avctx, AV_LOG_WARNING, "Setting duplex mode > > failed.\n"); > > else > > +#if BLACKMAGIC_DECKLINK_API_VERSION >= 0x0b020000 > > + av_log(avctx, AV_LOG_VERBOSE, "Successfully set duplex > > mode to %s duplex.\n", ctx->duplex_mode == 2 || ctx->duplex_mode == 4 ? > > "full" : "half"); > > +#else > > av_log(avctx, AV_LOG_VERBOSE, "Successfully set duplex mode > > to %s duplex.\n", ctx->duplex_mode == 2 ? "full" : "half"); > > +#endif > > } else { > > av_log(avctx, AV_LOG_WARNING, "Unable to set duplex mode, > > because it is not supported.\n"); > > } > > diff --git a/libavdevice/decklink_common.h b/libavdevice/decklink_common.h > > index ad8b33c..a2d6509 100644 > > --- a/libavdevice/decklink_common.h > > +++ b/libavdevice/decklink_common.h > > @@ -208,6 +208,17 @@ static const BMDLinkConfiguration > > decklink_link_conf_map[] = { > > bmdLinkConfigurationQuadLink > > }; > > > > +#if BLACKMAGIC_DECKLINK_API_VERSION >= 0x0b020000 > > +static const BMDProfileID decklink_profile_id_map[] = { > > + (BMDProfileID)0, > > + bmdProfileTwoSubDevicesHalfDuplex, > > + bmdProfileOneSubDeviceFullDuplex, > > + bmdProfileOneSubDeviceHalfDuplex, > > + bmdProfileTwoSubDevicesFullDuplex, > > + bmdProfileFourSubDevicesHalfDuplex, > > +}; > > +#endif > > + > > int ff_decklink_set_configs(AVFormatContext *avctx, decklink_direction_t > > direction); > > int ff_decklink_set_format(AVFormatContext *avctx, int width, int height, > > int tb_num, int tb_den, enum AVFieldOrder field_order, decklink_direction_t > > direction = DIRECTION_OUT); > > int ff_decklink_set_format(AVFormatContext *avctx, decklink_direction_t > > direction); > > diff --git a/libavdevice/decklink_dec_c.c b/libavdevice/decklink_dec_c.c > > index 1d93e8b..d0ef86a 100644 > > --- a/libavdevice/decklink_dec_c.c > > +++ b/libavdevice/decklink_dec_c.c > > @@ -45,10 +45,20 @@ static const AVOption options[] = { > > { "standard", NULL, 0, > > AV_OPT_TYPE_CONST, { .i64 = 0x7fff9fffeLL}, 0, 0, DEC, "teletext_lines"}, > > { "all", NULL, 0, > > AV_OPT_TYPE_CONST, { .i64 = 0x7ffffffffLL}, 0, 0, DEC, "teletext_lines"}, > > { "channels", "number of audio channels", OFFSET(audio_channels), > > AV_OPT_TYPE_INT , { .i64 = 2 }, 2, 16, DEC }, > > +#if BLACKMAGIC_DECKLINK_API_VERSION >= 0x0b020000 > > + { "duplex_mode", "duplex mode", OFFSET(duplex_mode), > > AV_OPT_TYPE_INT, { .i64 = 0}, 0, 5, DEC, "duplex_mode"}, > > +#else > > { "duplex_mode", "duplex mode", OFFSET(duplex_mode), > > AV_OPT_TYPE_INT, { .i64 = 0}, 0, 2, DEC, "duplex_mode"}, > > +#endif > > { "unset", NULL, 0, > > AV_OPT_TYPE_CONST, { .i64 = 0}, 0, 0, DEC, "duplex_mode"}, > > { "half", NULL, 0, > > AV_OPT_TYPE_CONST, { .i64 = 1}, 0, 0, DEC, "duplex_mode"}, > > { "full", NULL, 0, > > AV_OPT_TYPE_CONST, { .i64 = 2}, 0, 0, DEC, "duplex_mode"}, > > +#if BLACKMAGIC_DECKLINK_API_VERSION >= 0x0b020000 > > + { "one_sub_device_full", NULL, 0, > > AV_OPT_TYPE_CONST, { .i64 = 2}, 0, 0, DEC, "duplex_mode"}, > > + { "one_sub_device_half", NULL, 0, > > AV_OPT_TYPE_CONST, { .i64 = 3}, 0, 0, DEC, "duplex_mode"}, > > + { "two_sub_device_full", NULL, 0, > > AV_OPT_TYPE_CONST, { .i64 = 4}, 0, 0, DEC, "duplex_mode"}, > > + { "four_sub_device_half", NULL, 0, > > AV_OPT_TYPE_CONST, { .i64 = 5}, 0, 0, DEC, "duplex_mode"}, > > +#endif > > { "timecode_format", "timecode format", OFFSET(tc_format), > > AV_OPT_TYPE_INT, { .i64 = 0}, 0, 8, DEC, "tc_format"}, > > { "none", NULL, 0, > > AV_OPT_TYPE_CONST, { .i64 = 0}, 0, 0, DEC, "tc_format"}, > > { "rp188vitc", NULL, 0, > > AV_OPT_TYPE_CONST, { .i64 = 1}, 0, 0, DEC, "tc_format"}, > > diff --git a/libavdevice/decklink_enc_c.c b/libavdevice/decklink_enc_c.c > > index 614a84a..4b05908 100644 > > --- a/libavdevice/decklink_enc_c.c > > +++ b/libavdevice/decklink_enc_c.c > > @@ -31,10 +31,20 @@ static const AVOption options[] = { > > { "list_devices", "use ffmpeg -sinks decklink instead", > > OFFSET(list_devices), AV_OPT_TYPE_BOOL, { .i64 = 0 }, 0, 1, ENC | > > AV_OPT_FLAG_DEPRECATED}, > > { "list_formats", "list supported formats" , OFFSET(list_formats), > > AV_OPT_TYPE_INT , { .i64 = 0 }, 0, 1, ENC }, > > { "preroll" , "video preroll in seconds", OFFSET(preroll ), > > AV_OPT_TYPE_DOUBLE, { .dbl = 0.5 }, 0, 5, ENC }, > > +#if BLACKMAGIC_DECKLINK_API_VERSION >= 0x0b020000 > > + { "duplex_mode" , "duplex mode" , OFFSET(duplex_mode ), > > AV_OPT_TYPE_INT , { .i64 = 0 }, 0, 5, ENC, "duplex_mode"}, > > +#else > > { "duplex_mode" , "duplex mode" , OFFSET(duplex_mode ), > > AV_OPT_TYPE_INT , { .i64 = 0 }, 0, 2, ENC, "duplex_mode"}, > > +#endif > > { "unset" , NULL , 0 , > > AV_OPT_TYPE_CONST , { .i64 = 0 }, 0, 0, ENC, "duplex_mode"}, > > { "half" , NULL , 0 , > > AV_OPT_TYPE_CONST , { .i64 = 1 }, 0, 0, ENC, "duplex_mode"}, > > { "full" , NULL , 0 , > > AV_OPT_TYPE_CONST , { .i64 = 2 }, 0, 0, ENC, "duplex_mode"}, > > +#if BLACKMAGIC_DECKLINK_API_VERSION >= 0x0b020000 > > + { "one_sub_device_full" ,NULL , 0 , > > AV_OPT_TYPE_CONST , { .i64 = 2 }, 0, 0, ENC, "duplex_mode"}, > > + { "one_sub_device_half" ,NULL , 0 , > > AV_OPT_TYPE_CONST , { .i64 = 3 }, 0, 0, ENC, "duplex_mode"}, > > + { "two_sub_device_full" ,NULL , 0 , > > AV_OPT_TYPE_CONST , { .i64 = 4 }, 0, 0, ENC, "duplex_mode"}, > > + { "four_sub_device_half" ,NULL , 0 , > > AV_OPT_TYPE_CONST , { .i64 = 5 }, 0, 0, ENC, "duplex_mode"}, > > +#endif > > { "link" , "link configure" , OFFSET(link) , > > AV_OPT_TYPE_INT , { .i64 = 0 }, 0, 3, ENC, "link"}, > > { "unset" , NULL , 0 , > > AV_OPT_TYPE_CONST , { .i64 = 0 }, 0, 0, ENC, "link"}, > > { "single" , NULL , 0 , > > AV_OPT_TYPE_CONST , { .i64 = 1 }, 0, 0, ENC, "link"}, > > -- > > 1.8.3.1 > > > > _______________________________________________ > > ffmpeg-devel mailing list > > ffmpeg-devel@ffmpeg.org > > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > > > To unsubscribe, visit link above, or email > > ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe". > > > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > https://ffmpeg.org/mailman/listinfo/ffmpeg-devel > > To unsubscribe, visit link above, or email > ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe". -- Thanks, Limin Wang _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-devel To unsubscribe, visit link above, or email ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".