This exposes VP8E_SET_SCREEN_CONTENT_MODE option from libvpx.
Changes since v1:
- Put the new param initialzation in the right place,
- Account for cases when the encoder's output is queued up.
Co-authored-by: Erik Språng <spr...@webrtc.org>
Signed-off-by: Dariusz Marcinkiewicz <dar...@google.com>
---
doc/encoders.texi | 7 ++++--
libavcodec/libvpxenc.c | 56 ++++++++++++++++++++++++++++++++++++++----
2 files changed, 56 insertions(+), 7 deletions(-)
diff --git a/doc/encoders.texi b/doc/encoders.texi
index c9fe6d6143..2a9b38f62a 100644
--- a/doc/encoders.texi
+++ b/doc/encoders.texi
@@ -2186,6 +2186,11 @@ Enable error resiliency features.
Increase sharpness at the expense of lower PSNR.
The valid range is [0, 7].
+@item tune-content
+Set content type.
+For VP8: default (0), screen (1), screen with aggressive rate control (2).
+For VP9: default (0), screen (1), film (2).
+
@item ts-parameters
Sets the temporal scalability configuration using a :-separated list of
key=value pairs. For example, to specify temporal scalability parameters
@@ -2268,8 +2273,6 @@ colorspaces:
@end table
@item row-mt @var{boolean}
Enable row based multi-threading.
-@item tune-content
-Set content type: default (0), screen (1), film (2).
@item corpus-complexity
Corpus VBR mode is a variant of standard VBR where the complexity distribution
midpoint is passed in rather than calculated for a specific clip or chunk.
diff --git a/libavcodec/libvpxenc.c b/libavcodec/libvpxenc.c
index 80988a2608..c73c92d49b 100644
--- a/libavcodec/libvpxenc.c
+++ b/libavcodec/libvpxenc.c
@@ -164,6 +164,7 @@ static const char *const ctlidstr[] = {
[VP8E_SET_MAX_INTRA_BITRATE_PCT] = "VP8E_SET_MAX_INTRA_BITRATE_PCT",
[VP8E_SET_SHARPNESS] = "VP8E_SET_SHARPNESS",
[VP8E_SET_TEMPORAL_LAYER_ID] = "VP8E_SET_TEMPORAL_LAYER_ID",
+ [VP8E_SET_SCREEN_CONTENT_MODE] = "VP8E_SET_SCREEN_CONTENT_MODE",
#if CONFIG_LIBVPX_VP9_ENCODER
[VP9E_SET_LOSSLESS] = "VP9E_SET_LOSSLESS",
[VP9E_SET_TILE_COLUMNS] = "VP9E_SET_TILE_COLUMNS",
@@ -1262,6 +1263,16 @@ static av_cold int vpx_init(AVCodecContext *avctx,
#endif
}
#endif
+#ifdef VPX_CTRL_VP8E_SET_SCREEN_CONTENT_MODE
+ if (avctx->codec_id == AV_CODEC_ID_VP8 && ctx->tune_content >= 0) {
+ if (ctx->tune_content == 2 && ctx->is_alpha) {
+ av_log(avctx, AV_LOG_ERROR,
+ "Transparency encoding with screen mode with aggressive rate
control not supported\n");
+ return AVERROR(EINVAL);
+ }
+ codecctl_int(avctx, VP8E_SET_SCREEN_CONTENT_MODE, ctx->tune_content);
+ }
+#endif
av_log(avctx, AV_LOG_DEBUG, "Using deadline: %d\n", ctx->deadline);
@@ -1379,14 +1390,15 @@ static int storeframe(AVCodecContext *avctx, struct
FrameListData *cx_frame,
* @return AVERROR(ENOMEM) on coded frame queue data allocation error
*/
static int queue_frames(AVCodecContext *avctx, struct vpx_codec_ctx *encoder,
- struct FrameListData **frame_list, AVPacket *pkt_out)
+ struct FrameListData **frame_list, AVPacket *pkt_out,
+ int queue_only, int *frame_enc)
{
VPxContext *ctx = avctx->priv_data;
const struct vpx_codec_cx_pkt *pkt;
const void *iter = NULL;
int size = 0;
- if (!ctx->is_alpha && *frame_list) {
+ if (!queue_only && *frame_list) {
struct FrameListData *cx_frame = *frame_list;
/* return the leading frame if we've already begun queueing */
size = storeframe(avctx, cx_frame, NULL, pkt_out);
@@ -1401,7 +1413,7 @@ static int queue_frames(AVCodecContext *avctx, struct
vpx_codec_ctx *encoder,
while (pkt = vpx_codec_get_cx_data(encoder, &iter)) {
switch (pkt->kind) {
case VPX_CODEC_CX_FRAME_PKT:
- if (!ctx->is_alpha && !size) {
+ if (!queue_only && !size) {
struct FrameListData cx_frame;
/* avoid storing the frame when the list is empty and we
haven't yet
@@ -1411,6 +1423,8 @@ static int queue_frames(AVCodecContext *avctx, struct
vpx_codec_ctx *encoder,
size = storeframe(avctx, &cx_frame, NULL, pkt_out);
if (size < 0)
return size;
+ if (size > 0)
+ *frame_enc = 1;
} else {
struct FrameListData *cx_frame = av_malloc(sizeof(*cx_frame));
@@ -1430,6 +1444,8 @@ static int queue_frames(AVCodecContext *avctx, struct
vpx_codec_ctx *encoder,
return AVERROR(ENOMEM);
}
memcpy(cx_frame->buf, pkt->data.frame.buf, pkt->data.frame.sz);
+ if (pkt->data.frame.sz > 0)
+ *frame_enc = 1;
coded_frame_add(frame_list, cx_frame);
}
break;
@@ -1693,6 +1709,7 @@ static int vpx_encode(AVCodecContext *avctx, AVPacket
*pkt,
vpx_svc_layer_id_t layer_id;
int layer_id_valid = 0;
unsigned long duration = 0;
+ int frame_enc = 0;
if (avctx->qmax >= 0 && enccfg->rc_max_quantizer != avctx->qmax) {
struct vpx_codec_enc_cfg cfg = *enccfg;
@@ -1856,9 +1873,32 @@ FF_ENABLE_DEPRECATION_WARNINGS
}
}
- coded_size = queue_frames(avctx, &ctx->encoder, &ctx->coded_frame_list,
pkt);
+ coded_size = queue_frames(avctx, &ctx->encoder, &ctx->coded_frame_list,
+ pkt, ctx->is_alpha, &frame_enc);
+ if (avctx->codec_id == AV_CODEC_ID_VP8 && frame_enc == 0 &&
+ ctx->tune_content == 2 && frame) {
+ // VP8 tuned for screen content with aggresive rate control - returned
+ // OK status code but produced no output, this indicates frame was
+ // rolled back due to bitrate overshoot - try to encode it again.
+ av_log(avctx, AV_LOG_VERBOSE,
+ "Attempting to reencode dropped VP8 screencast frame.\n");
+ res = vpx_codec_encode(&ctx->encoder, rawimg, timestamp,
+ duration, flags, ctx->deadline);
+ if (res != VPX_CODEC_OK) {
+ log_encoder_error(avctx, "Error encoding frame");
+ return AVERROR_INVALIDDATA;
+ }
+ if (!coded_size)
+ coded_size = queue_frames(avctx, &ctx->encoder,
&ctx->coded_frame_list,
+ pkt, /*queue_only*/0, &frame_enc);
+ else
+ queue_frames(avctx, &ctx->encoder, &ctx->coded_frame_list, pkt,
+ /*queue_only*/1, &frame_enc);
+ }
+
if (ctx->is_alpha) {
- queue_frames(avctx, &ctx->encoder_alpha, &ctx->alpha_coded_frame_list,
NULL);
+ queue_frames(avctx, &ctx->encoder_alpha, &ctx->alpha_coded_frame_list,
+ NULL, /*queue_only*/1, &frame_enc);
if (ctx->coded_frame_list && ctx->alpha_coded_frame_list) {
struct FrameListData *cx_frame = ctx->coded_frame_list;
@@ -1946,6 +1986,12 @@ static const AVOption vp8_options[] = {
{ "auto-alt-ref", "Enable use of alternate reference "
"frames (2-pass only)",
OFFSET(auto_alt_ref), AV_OPT_TYPE_INT, {.i64 = -1}, -1, 2, VE},
{ "cpu-used", "Quality/Speed ratio modifier",
OFFSET(cpu_used), AV_OPT_TYPE_INT, {.i64 = 1}, -16, 16, VE},
+#ifdef VPX_CTRL_VP8E_SET_SCREEN_CONTENT_MODE
+ { "tune-content", "Tune content type",
OFFSET(tune_content), AV_OPT_TYPE_INT, {.i64 = -1}, -1, 2, VE,
"tune_content"},
+ { "default", "Regular video content", 0,
AV_OPT_TYPE_CONST, {.i64 = 0}, 0, 0, VE, "tune_content"},
+ { "screen", "Screen content mode on", 0,
AV_OPT_TYPE_CONST, {.i64 = 1}, 0, 0, VE, "tune_content"},
+ { "screen-rate-control", "Screen content mode with aggressive rate
control", 0, AV_OPT_TYPE_CONST, {.i64 = 2}, 0, 0, VE,
"tune_content"},
+#endif
LEGACY_OPTIONS
{ NULL }
};
--
2.43.0.429.g432eaa2c6b-goog
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
