Hi,
Thanks for the link! The following command seems to be do the job i wanted.
cat 000_Images/2022/04/2022-04-10/*.jpeg | ffmpeg -f image2pipe -i -
output.mkv
Regards, Laszlo
2022. 04. 11. 11:42 keltezéssel, Paul B Mahol írta:
On Mon, Apr 11, 2022 at 11:35 AM Balogh László <l...@blacc.hu> wrote:
Thank,
I have a backup of the framsets, so no panic. :)
But then why is asking to overwrite? Why does the ffmpeg try to
overwrite? Here the command without "-y":
will need to use -f image2 demuxer
Consult https://trac.ffmpeg.org/wiki/Slideshow for more info.
mcll@mcllserver-i3:/home/VVCam$ ffmpeg -framerate 25 -i
000_Images/2022/04/2022-04-10/*.jpeg -c:v libx264 -profile:v high -crf
20 -pix_fmt yuv420p output.mp4
ffmpeg version 3.4.8-0ubuntu0.2 Copyright (c) 2000-2020 the FFmpeg
developers
built with gcc 7 (Ubuntu 7.5.0-3ubuntu1~18.04)
configuration: --prefix=/usr --extra-version=0ubuntu0.2
--toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu
--incdir=/usr/include/x86_64-linux-gnu --enable-gpl --disable-stripping
--enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa
--enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca
--enable-libcdio --enable-libflite --enable-libfontconfig
--enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm
--enable-libmp3lame --enable-libmysofa --enable-libopenjpeg
--enable-libopenmpt --enable-libopus --enable-libpulse
--enable-librubberband --enable-librsvg --enable-libshine
--enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
--enable-libtheora --enable-libtwolame --enable-libvorbis
--enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265
--enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi
--enable-omx --enable-openal --enable-opengl --enable-sdl2
--enable-libdc1394 --enable-libdrm --enable-libiec61883
--enable-chromaprint --enable-frei0r --enable-libopencv --enable-libx264
--enable-shared
libavutil 55. 78.100 / 55. 78.100
libavcodec 57.107.100 / 57.107.100
libavformat 57. 83.100 / 57. 83.100
libavdevice 57. 10.100 / 57. 10.100
libavfilter 6.107.100 / 6.107.100
libavresample 3. 7. 0 / 3. 7. 0
libswscale 4. 8.100 / 4. 8.100
libswresample 2. 9.100 / 2. 9.100
libpostproc 54. 7.100 / 54. 7.100
Input #0, image2, from
'000_Images/2022/04/2022-04-10/2022-04-10_00_00_01.jpeg':
Duration: 00:00:00.04, start: 0.000000, bitrate: 66148 kb/s
Stream #0:0: Video: mjpeg, yuvj420p(pc, bt470bg/unknown/unknown),
2688x1520 [SAR 1:1 DAR 168:95], 25 tbr, 25 tbn, 25 tbc
File '000_Images/2022/04/2022-04-10/2022-04-10_00_00_21.jpeg' already
exists. Overwrite ? [y/N]
Regards, Laszlo
2022. 04. 11. 11:26 keltezéssel, Paul B Mahol írta:
On Mon, Apr 11, 2022 at 11:22 AM Paul B Mahol <one...@gmail.com> wrote:
On Mon, Apr 11, 2022 at 10:58 AM Balogh László <l...@blacc.hu> wrote:
Hi,
I have about 4300 pictures in a folder
(000_Images/2022/04/2022-04-10/).
I want to create a video from them, every picture should be one frame
in
the video.
I'm using the following command: ffmpeg -framerate 25 -i
000_Images/2022/04/2022-04-10/*.jpeg -c:v libx264 -profile:v high -crf
20 -pix_fmt yuv420p -y output.mp4
Its starting, but after about 500 pictures ffmpeg is slowing down,
while
the system load goes quickly up. It was hard to cancel the command, as
the load was above 80. :)
Here some log of the command:
mcll@mcllserver-i3:/home/VVCam$ ffmpeg -framerate 25 -i
000_Images/2022/04/2022-04-10/*.jpeg -c:v libx264 -profile:v high -crf
20 -pix_fmt yuv420p -y output.mp4
built with gcc 7 (Ubuntu 7.5.0-3ubuntu1~18.04)
configuration: --prefix=/usr --extra-version=0ubuntu0.2
--toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu
--incdir=/usr/include/x86_64-linux-gnu --enable-gpl --disable-stripping
--enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa
--enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca
--enable-libcdio --enable-libflite --enable-libfontconfig
--enable-libfreetype --enable-libfribidi --enable-libgme
--enable-libgsm
--enable-libmp3lame --enable-libmysofa --enable-libopenjpeg
--enable-libopenmpt --enable-libopus --enable-libpulse
--enable-librubberband --enable-librsvg --enable-libshine
--enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
--enable-libtheora --enable-libtwolame --enable-libvorbis
--enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265
--enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi
--enable-omx --enable-openal --enable-opengl --enable-sdl2
--enable-libdc1394 --enable-libdrm --enable-libiec61883
--enable-chromaprint --enable-frei0r --enable-libopencv
--enable-libx264
--enable-shared
libavutil 55. 78.100 / 55. 78.100
libavcodec 57.107.100 / 57.107.100
libavformat 57. 83.100 / 57. 83.100
libavdevice 57. 10.100 / 57. 10.100
libavfilter 6.107.100 / 6.107.100
libavresample 3. 7. 0 / 3. 7. 0
libswscale 4. 8.100 / 4. 8.100
libswresample 2. 9.100 / 2. 9.100
libpostproc 54. 7.100 / 54. 7.100
Input #0, image2, from
'000_Images/2022/04/2022-04-10/2022-04-10_00_00_01.jpeg':
Duration: 00:00:00.04, start: 0.000000, bitrate: 66148 kb/s
Stream #0:0: Video: mjpeg, yuvj420p(pc, bt470bg/unknown/unknown),
2688x1520 [SAR 1:1 DAR 168:95], 25 tbr, 25 tbn, 25 tbc
Stream mapping:
Stream #0:0 -> #0:0 (mjpeg (native) -> mjpeg (native))
Stream #0:0 -> #1:0 (mjpeg (native) -> mjpeg (native))
Stream #0:0 -> #2:0 (mjpeg (native) -> mjpeg (native))
Stream #0:0 -> #3:0 (mjpeg (native) -> mjpeg (native))
Stream #0:0 -> #4:0 (mjpeg (native) -> mjpeg (native))
Stream #0:0 -> #5:0 (mjpeg (native) -> mjpeg (native))
Stream #0:0 -> #6:0 (mjpeg (native) -> mjpeg (native))
...cut...
Stream #0:0 -> #4316:0 (mjpeg (native) -> mjpeg (native))
Stream #0:0 -> #4317:0 (mjpeg (native) -> mjpeg (native))
Stream #0:0 -> #4318:0 (mjpeg (native) -> mjpeg (native))
Stream #0:0 -> #4319:0 (mjpeg (native) -> h264 (libx264))
Press [q] to stop, [?] for help
Output #0, image2, to
'000_Images/2022/04/2022-04-10/2022-04-10_00_00_21.jpeg':
Metadata:
encoder : Lavf57.83.100
Stream #0:0: Video: mjpeg, yuvj420p(pc), 2688x1520 [SAR 1:1 DAR
168:95], q=2-31, 200 kb/s, 25 fps, 25 tbn, 25 tbc
Metadata:
encoder : Lavc57.107.100 mjpeg
Side data:
cpb: bitrate max/min/avg: 0/0/200000 buffer size: 0 vbv_delay:
-1
Output #1, image2, to
'000_Images/2022/04/2022-04-10/2022-04-10_00_00_41.jpeg':
Metadata:
encoder : Lavf57.83.100
Stream #1:0: Video: mjpeg, yuvj420p(pc), 2688x1520 [SAR 1:1 DAR
168:95], q=2-31, 200 kb/s, 25 fps, 25 tbn, 25 tbc
Metadata:
encoder : Lavc57.107.100 mjpeg
Side data:
cpb: bitrate max/min/avg: 0/0/200000 buffer size: 0 vbv_delay:
-1
Output #2, image2, to
'000_Images/2022/04/2022-04-10/2022-04-10_00_01_01.jpeg':
Metadata:
encoder : Lavf57.83.100
Stream #2:0: Video: mjpeg, yuvj420p(pc), 2688x1520 [SAR 1:1 DAR
168:95], q=2-31, 200 kb/s, 25 fps, 25 tbn, 25 tbc
Metadata:
encoder : Lavc57.107.100 mjpeg
Side data:
cpb: bitrate max/min/avg: 0/0/200000 buffer size: 0 vbv_delay:
-1
...etc...
Why is this generating such a high load, and what should i do?
It is for some reason creating separate streams for each jpeg image.
Is your ffmpeg modified or you use script?
Because original ffmpeg does not do this.
Ignore that remark above, I forgot -y switch.
Oops, using -y switch in your case is very dangerous.
You completely ditched all jpegs and replaced them with the first one.
NEVER EVER USE -y SWITCH, NEVER EVER.
Thanks
Regards, Laszlo
_______________________________________________
ffmpeg-user mailing list
ffmpeg-user@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-user
To unsubscribe, visit link above, or email
ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe".
_______________________________________________
ffmpeg-user mailing list
ffmpeg-user@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-user
To unsubscribe, visit link above, or email
ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe".
_______________________________________________
ffmpeg-user mailing list
ffmpeg-user@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-user
To unsubscribe, visit link above, or email
ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe".
_______________________________________________
ffmpeg-user mailing list
ffmpeg-user@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-user
To unsubscribe, visit link above, or email
ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe".
_______________________________________________
ffmpeg-user mailing list
ffmpeg-user@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-user
To unsubscribe, visit link above, or email
ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe".