I'm baffled by a new set of problems with my LS2000. I'm using
Vuescan 7.5.1, Silverfast 4.2.7 r0.5 & NikonScan 2.5.1.
With NikonScan run as a plug-in or as a stand alone app I can use my
bulk slide feeder SF200 & the focus is OK (exposure isn't but then it
never was with NikonScan). So the hardware must be OK?
With Silverfast I can do individual scans with the MA20 which are
fine but with the bulk feeder the scans are all seriously out of
focus. I mean miles out! I can reset the focus manually (to zero) &
get results that are merely poorly focused (mounts vary, film stock
varies, mechanical inaccuracies) but on any of the autofocus settings
it is completely useless.
With Vuescan I can do everything except get a sharp (focused) output
when using the SF200.
I have recently upgraded my G3 rev1 266 desktop from system 8.6 to
system 9 but restarting from the old 8.6 system doesn't cure the
problem.
Any ideas out there?
David Hoffman
--
__________________________________________________________
David Hoffman Photo Library
<http://www.hoffmanphotos.com>
phone +44 (0)20 8981 5041 fax +44 (0)20 8980 2041
Photography is a fad well nigh on its last legs, thanks largely to
the bicycle craze.
Alfred Stieglitz 1897.
