Have you set the Crop and Buffer such that you are sure VueScan is
looking at actual picture content (and not frame edges or sprocket
holes) for setting the white and black points? If it sees a sprocket
hole or an opaque frame edge that really messes things up! The picture
will be quite flat (low contrast) and the color balance will be way
off.
--Dana
----------
From: Alan Womack <[EMAIL PROTECTED]>
To: Majordomo leben.com <[EMAIL PROTECTED]>
Subject: filmscanners: Vuescan Blue's
Date: Monday, August 20, 2001 10:14 PM
I'm still trying to figure out why my scans with Vuescan have too much
blue in them.. But that is a side note to a current roll I am working
on.
It is my kids at the beach, the sand is more yellow than gray, but
Vuescan is giving me pretty aweful color. Wondering what some of you
others use for color settings when working with Beach pictures?
Currently I'm on:
Autolevels
gamma .8
Brigtness 1
Negative Advantix 100-2
Black point 0
white point .1%
Without the advantix 100-2 I have NO saturation, even with this I have
to pump saturation up 26 points to start getting some tone to the skin.
Blue is above green in the image, which is below red reasonably.
thoughts?
alan
Epson Inkjet Printer FAQ: http://welcome.to/epson-inkjet
