> BTW, do you think 2800-2900 dpi is good enough for quality A3 sized print > (about 260-270 dpi > and that size)
Yes, if it's an inkjet print, because the printer resolution is less than this (approx 200dpi sent to the printer). But remember you may wish to crop a frame, and still print at A3, so you might need more pixels. OTOH, it depends on what you mean by 'quality A3'. If you mean something against which, after cropping and printing with less than 200ppi, keen amateur photographers will press their noses and loupes and be hypercritical, the answer is "no". If you mean something that will impress less critical friends and relations when hung over the fireplace and viewed from several metres away, you can go much bigger than A3 (at least A2) with 2700 ppi and still have satisfied customers. Regards, good luck, and have lots of fun, Alan T ----- Original Message ----- From: Alex Z <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, September 30, 2001 7:38 PM Subject: RE: filmscanners: Best scanner software