Owen, Thomas, I have downloaded and installed v5.5 of Polaroid's software. I also have updated the scanner driver from v1.3 to 1.4. Unfortunately, it still doesn't work. The same is true when I restrict Polaroid's software to use only one cpu. Since the same problem happens with Silverfast I do not believe that Vuescan would solve the problem. Maybe installing the ASPI driver will help. I'll try that later.
Thanks, Robert > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of owenpevans > Sent: Saturday, July 13, 2002 7:13 PM > To: [EMAIL PROTECTED] > Subject: [filmscanners] Re: Problems With SS4000 > > > Hi Bob, > Did you load the ASPI drivers necessary for this application? It > can be had > at www.hamrick.com > Secondly, I would download Version 5.5 of the Polaroid software as it is > much improved over the 4.5 you have. > Lastly, try Ed Hamrick's version 7.5.37 and with all the new features I > think after you do, you may toss the other two out. Beware the > 7.5.37 needs > ASPI also. > Hope this helps, > Owen > ----- Original Message ----- > From: "Robert Meier" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, July 13, 2002 9:31 PM > Subject: [filmscanners] RE: Problems With SS4000 > > > Tom and All, > > I am running W2k. My scanner is the SS4000, not SS4000 Plus. The SCSI card > is the one coming with the scanner. I believe it's an Adaptec 2940 or > something. No other SCSI devices are connected to the card. Termination > should be ok as I have used the same setup on a different computer. > > If I can't solve the problem I think I will setup the scanner on my old > PIII. It has only 384MB memory and 40GB HD but that is good enough for > scanning. Then I'll just transfer the files on my just installed 100Mbit > LAN. Kind of cumbersom but I guess it should work out... Anyway, > if you have > suggestions to solve my problem I would be happy. > > Robert > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > > > What OS and version are you using? Do you have the SS4000 or > > SS4000 Plus? If > > you are using SCSI what card are you using and what else is on the SCSI > > chain? > > > > Tom > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > I have a Polaroid SS4000 which I did just setup on my new system. > > Unfortunately, I have quite some problems. First when the driver for the > > Polaroid was installed the system crashed with a blue screen. The second > > time it did work, or at least seemed to work. Then when I start > Polaroid's > > software v4.5 or Silverfast 5 the system completely hangs during > > initialization of the scanner. Any ideas how to fix that? If it helps > > anything here is my system configuration: > > Asus A7M266-D, dual Athlon MP1900+, 1GB module Kingston memory, > > IDE RAID 0, > > Radon 8500DV. > > Any help is appreciated. > > > > Robert > > > > ------------------------------------------------------------------ > > ---------- > > ------------ > > Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe > > filmscanners' > > or 'unsubscribe filmscanners_digest' (as appropriate) in the > message title > > or body > > > > ------------------------------------------------------------------ > > ---------------------- > > Unsubscribe by mail to [EMAIL PROTECTED], with > > 'unsubscribe filmscanners' > > or 'unsubscribe filmscanners_digest' (as appropriate) in the > > message title or body > > ------------------------------------------------------------------ > ---------- > ------------ > Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe > filmscanners' > or 'unsubscribe filmscanners_digest' (as appropriate) in the message title > or body > > ------------------------------------------------------------------ > ---------------------- > Unsubscribe by mail to [EMAIL PROTECTED], with > 'unsubscribe filmscanners' > or 'unsubscribe filmscanners_digest' (as appropriate) in the > message title or body ---------------------------------------------------------------------------------------- Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body