Hello, if there's anybody out there. I have a problem using PS Elements 1.0. I know there is a list for PS, but maybe one of you folks can make this easy.
I have a scanned image that is 17.6 MB. I am trying to print it on an Epson 2200, 13x19 @1440dpi. I am getting an error after the printer driver has initiated, prior to anything actually going out to the printer, saying that there is not enough memory for this operation, and to close any unused applications. There are no other applications open except for the Mac Finder. I have over 180 MB of unused memory available on my Mac G4, with a total of 320 MB of hardware RAM. Virtual memory is off, but it shouldn't be needed, and I have not needed it before. I have set the preferred allocation of memory for PS Elements to 120 MB (it was at 44 MB, but I upped it just to be sure that was not an issue.) Am I correct in assuming that the size of the file that is being transmitted to the printer is 17.6 MB, which is the actual image file size on the hard drive, and the same as reported in Elements? So what has changed? I added some Epson 2200 profiles that I downloaded from Epson, and I changed a setting or two in the print setup in PS Elements. But why should any of that matter? I have printed larger files on 13x19 before, so I am stumped. Any ideas? Berry ---------------------------------------------------------------------------------------- Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body