No I installed vista ultimate 32bit not 64bit. Even my old flatbed Epson perfection 1200 installs from the disc, twain works perfectly in Photoshop. In device manager the SCSI controller has the exclamation mark showing and no amount of trying to install any Adaptec driver ( as for XP ) will work. As you say Laurie, Vista just doesn't recognize the SCSI card. I've found that for most things that Vista doesn't like, by installing in compatibility mode, seems to get around them.
You guys here were my last resort !!!!! David. ----- Original Message ----- From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, June 10, 2007 7:13 PM Subject: [filmscanners] RE: Nikon LS30 & Vista As a note, at this point in time, there are little by way of drivers for scanners (or printers, for that matter) on the market for Vista X64 OSs - or for that matter XP X64 OSs. As for ASPI Layers, Microsoft also is displaying little interest in supporting them in the future - especially for X64 systems. I have been able to get a Umax Powerlook II SCSI flatbed Scanner to work under Vista X32 using the old XP X32 Twain driver that came with scanner without problems; but that X32 bit driver will not work with an X64 bit OS. I have to wonder if your X64 Vista system even recognizes the SCSI card - let alone the scanner attached to it. If it does recognize the SCSI card, than the ASPI layer may not be the problem; the scanner driver may be the problem, since it probably is a 32 bit TWAIN driver. There never has been, I am told, a 64 bit twain driver written for public release. > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Sunday, June 10, 2007 10:14 AM > To: [EMAIL PROTECTED] > Subject: [filmscanners] Re: Nikon LS30 & Vista > > I use a Minolta Dimage 5400 II running under X64 (precursor to Vista). > It is USB interfaced, so SCSI isn't exactly an issue. However, > technically ASPI is still required. This is a problem with X64 > (probably > Vista, but I have no first hand knowledge of this). With a bit of > googling, I found a thread on how to install the 32 bit ASPI on a 64 > bit > OS. Adaptec has little interest in supporting ASPI. > > David wrote: > > >Thanks Tony and Arthur for the replies, > > > >I e-mailed Ed. and according to him also, it should work. I had no > luck. > >Even though I've tamed Vista to my liking, this is the only thing I > can't > >do. > >As the Scanner plugs into the SCSI card it presumably has to have a > driver > >to work. > >I've googled and seems like nobody has been able to get a LS30 to work > with > >Vista. > >A shame really, as although I'm digital, Canon DSLR I still have a few > years > >worth of slides to scan, so I'll have to keep XP until I've finished. > > > >David. > > > > > >----- Original Message ----- > >From: "Arthur Entlich" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Sunday, June 10, 2007 10:49 AM > >Subject: [filmscanners] Re: Nikon LS30 & Vista > > > > > >Can you use Vuescan, which seems to have gotten around the SCSI api > and > >OS issue? > > > >Art > > > > > > > > > > > > > > > > > > > ----------------------------------------------------------------------- > ----------------- > Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe > filmscanners' > or 'unsubscribe filmscanners_digest' (as appropriate) in the message > title or body ---------------------------------------------------------------------------------------- Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body ---------------------------------------------------------------------------------------- Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body