Here's a quick method that I just came up with. cd /sw/fink/10.2/unstable (or stable if you are using it) grep -r BuildDepends | grep x11
This returns every info file with a BuildDepend that also has x11 in it somewhere (this adds everything from the x11, x11-system, and x11-wm sections, too, but these can be separated out). If someone has a better method (e.g. a perl or shell script) that works better, they should feel free to post it (and I'll steal it for myself!). -- Alexander K. Hansen Associate Research Scientist, Columbia University visiting MIT Plasma Science and Fusion Center Levitated Dipole Experiment 175 Albany Street, NW17-219 Cambridge, MA 02139-4213 On Tue, 28 Jan 2003, Koen van der Drift wrote: > > > > >If you aren't building anything that uses X11 libs you don't need it. > > So, how do I know which packages use X11 libs? Eg, I compiled Gimp, > before applying the patch. Since I run Gimp in X11, I assume that it > uses x11 libs. But what about all the packages that Gimp depends on, > should I rebuild them all? > > thanks, > > - Koen. > > > ------------------------------------------------------- > This SF.NET email is sponsored by: > SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! > http://www.vasoftware.com > _______________________________________________ > Fink-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/fink-users > ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
