On 7/2/07, Jeff Tang <[EMAIL PROTECTED]> wrote:
> I just switched to unstable and rsync. I'm trying to update and stuck on
> glib-shlibs. I get an error where there's not libtool. I did the
> selfupdate.
> How do I fix this?
>
>
> The package 'glib-shlibs' will be built and installed.
> Reading dependency for glib-1.2.10-51...
> Reading build dependency for glib-1.2.10-51...
> Reading dependency for glib-shlibs-1.2.10-51...
> Reading dependency for glib-shlibs-1.2.10-51...
> Reading build dependency for glib-shlibs-1.2.10-51...
> Reading build conflict for glib-1.2.10-51...
> Reading build conflict for glib-shlibs-1.2.10-51...
> The following package will be installed or updated:
> glib-shlibs
> Setting runtime build-lock...
> dpkg-deb -b /sw/src/fink.build/root-fink-buildlock-glib-1.2.10-51
> /sw/src/fink.build
> dpkg-deb: building package `fink-buildlock-glib-1.2.10-51' in
> `/sw/src/fink.build/fink-buildlock-glib-1.2.10-51_2007.07.02-17.13.50_darwin-i386.deb
> '.
> Installing build-lock package...
> /sw/bin/dpkg-lockwait -i
> /sw/src/fink.build/fink-buildlock-glib-1.2.10-51_2007.07.02-17.13.50_darwin-i386.deb
> Selecting previously deselected package fink-buildlock-glib-1.2.10-51 .
> (Reading database ... 27755 files and directories currently installed.)
> Unpacking fink-buildlock-glib-1.2.10-51 (from
> .../fink-buildlock-glib-1.2.10-51_2007.07.02-17.13.50_darwin-i386.deb)
> ...
> Setting up fink-buildlock-glib-1.2.10-51 (2007.07.02-17.13.50) ...
> gzip -dc /sw/src/glib-1.2.10.tar.gz | /sw/bin/tar -xvf - --no-same-owner
> --no-same-permissions
> glib-1.2.10/
> glib-1.2.10/Makefile.in
> glib-1.2.10/README
> glib-1.2.10/stamp- h.in
> glib-1.2.10/AUTHORS
> glib-1.2.10/COPYING
> glib-1.2.10/ChangeLog
> glib-1.2.10/INSTALL
> glib-1.2.10/Makefile.am
> glib-1.2.10/NEWS
> glib-1.2.10/acconfig.h
> glib-1.2.10/acinclude.m4
> glib-1.2.10/aclocal.m4
> glib-1.2.10/config.guess
> glib-1.2.10/config.h.in
> glib-1.2.10/config.sub
> glib-1.2.10/configure
> glib-1.2.10/configure.in
> glib-1.2.10/glib-config.in
> glib-1.2.10/glib.pc.in
> glib-1.2.10/glib.spec.in
> glib-1.2.10/gmodule.pc.in
> glib-1.2.10/gthread.pc.in
> glib-1.2.10/install-sh
> glib-1.2.10/ltconfig
> glib-1.2.10/ltmain.sh
> glib-1.2.10/missing
> glib-1.2.10/mkinstalldirs
> glib-1.2.10 /garray.c
> glib-1.2.10/gcache.c
> glib-1.2.10/gcompletion.c
> glib-1.2.10/gdataset.c
> glib-1.2.10/gdate.c
> glib-1.2.10/gerror.c
> glib-1.2.10/ghash.c
> glib-1.2.10/ghook.c
> glib-1.2.10/giochannel.c
> glib-1.2.10 /giounix.c
> glib-1.2.10/glist.c
> glib-1.2.10/gmain.c
> glib-1.2.10/gmem.c
> glib-1.2.10/gmessages.c
> glib-1.2.10/gmutex.c
> glib-1.2.10/gnode.c
> glib-1.2.10/gprimes.c
> glib-1.2.10/grel.c
> glib-1.2.10/gscanner.c
> glib-1.2.10/gslist.c
> glib-1.2.10/gstrfuncs.c
> glib-1.2.10/gstring.c
> glib-1.2.10/gtimer.c
> glib-1.2.10/gtree.c
> glib-1.2.10/gutils.c
> glib-1.2.10/testglib.c
> glib-1.2.10/testgdate.c
> glib-1.2.10/testgdateparser.c
> glib-1.2.10/glib.h
> glib-1.2.10/glib.m4
> glib-1.2.10/acglib.m4
> glib-1.2.10/sanity_check
> glib-1.2.10/README.win32
> glib-1.2.10/glib.def
> glib-1.2.10/makefile.msc.in
> glib-1.2.10/makefile.msc
> glib-1.2.10 /giowin32.c
> glib-1.2.10/glibconfig.h.win32
> glib-1.2.10/glibconfig.h.win32.in
> glib-1.2.10/config.h.win32
> glib-1.2.10/config.h.win32.in
> glib-1.2.10/gmodule/
> glib-1.2.10/gmodule/Makefile.in
> glib-1.2.10/gmodule/AUTHORS
> glib-1.2.10/gmodule/COPYING
> glib-1.2.10/gmodule/ChangeLog
> glib-1.2.10/gmodule/Makefile.am
> glib-1.2.10/gmodule/gmoduleconf.h.in
> glib-1.2.10/gmodule/gmodule.c
> glib-1.2.10/gmodule/libgplugin_a.c
> glib-1.2.10 /gmodule/libgplugin_b.c
> glib-1.2.10/gmodule/testgmodule.c
> glib-1.2.10/gmodule/gmodule.h
> glib-1.2.10/gmodule/gmodule.def
> glib-1.2.10/gmodule/gmodule-dl.c
> glib-1.2.10/gmodule/gmodule-dld.c
> glib-1.2.10/gmodule/gmodule- win32.c
> glib-1.2.10/gmodule/gmoduleconf.h.win32
> glib-1.2.10/gthread/
> glib-1.2.10/gthread/Makefile.in
> glib-1.2.10/gthread/ChangeLog
> glib-1.2.10/gthread/Makefile.am
> glib-1.2.10/gthread/gthread.c
> glib-1.2.10 /gthread/testgthread.c
> glib-1.2.10/gthread/gthread-posix.c
> glib-1.2.10/gthread/gthread-solaris.c
> glib-1.2.10/gthread/gthread-nspr.c
> glib-1.2.10/gthread/gthread-none.c
> glib-1.2.10/gthread/gthread.def
> glib-1.2.10 /docs/
> glib-1.2.10/docs/Makefile.in
> glib-1.2.10/docs/Makefile.am
> glib-1.2.10/docs/glib-config.1.in
> glib-1.2.10/docs/texinfo.tex
> glib-1.2.10/docs/glib.texi
> glib-1.2.10/docs/glib.html
> glib-1.2.10/docs/glib_toc.html
> glib-1.2.10/docs/glib.info
> glib-1.2.10/tests/
> glib-1.2.10/tests/Makefile.in
> glib-1.2.10/tests/Makefile.am
> glib-1.2.10/tests/array-test.c
> glib-1.2.10/tests/dirname-test.c
> glib-1.2.10/tests/hash-test.c
> glib-1.2.10/tests/list-test.c
> glib-1.2.10/tests/node-test.c
> glib-1.2.10/tests/relation-test.c
> glib-1.2.10/tests/slist-test.c
> glib-1.2.10/tests/string-test.c
> glib-1.2.10/tests/strfunc- test.c
> glib-1.2.10/tests/tree-test.c
> glib-1.2.10/tests/type-test.c
> glib-1.2.10/tests/makefile.msc
> glib-1.2.10/tests/makefile.msc.in
> glib-1.2.10/glib.spec
> cp -f /sw/lib/fink/update/config.guess .
> cp -f /sw/lib/fink/update/config.sub .
> cp -f /sw/lib/fink/update/ltconfig .
> cp -f /sw/lib/fink/update/ltmain.sh .
> patch -p1
> </sw/fink/dists/unstable/main/finkinfo/gnome/glib.patch
> patching file configure
> patching file gstrfuncs.c
> patch unexpectedly ends in middle of line
> Hunk #4 succeeded at 1105 with fuzz 1.
> perl -pi -e 's/HAVE_POLL/NO_POLL_HERE/g' gmain.c
> perl -pi -e 's/(AC_DEFUN\()([^[]+)(,)/\1\[\2]\3/' glib.m4
> ./configure --prefix=/sw --infodir=/sw/share/info --mandir=/sw/share/man
> --disable-static
> creating cache ./config.cache
> checking for a BSD compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking whether make sets ${MAKE}... yes
> checking for working aclocal... found
> checking for working autoconf... found
> checking for working automake... found
> checking for working autoheader... found
> checking for working makeinfo... found
> checking host system type... i386-apple-darwin8.10.1
> checking build system type... i386-apple-darwin8.10.1
> checking for ranlib... ranlib
> checking for gcc... gcc
> checking whether the C compiler (gcc -L/sw/lib) works... yes
> checking whether the C compiler (gcc -L/sw/lib) is a cross-compiler... no
> checking whether we are using GNU C... yes
> checking whether gcc accepts -g... yes
> checking for ld used by GCC... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... no
> checking for BSD-compatible nm... /usr/bin/nm -p
> checking whether ln -s works... yes
> updating cache ./config.cache
> loading cache ./config.cache
> checking whether to enable maintainer-specific portions of Makefiles... no
> checking host system type... i386-apple-darwin8.10.1
> checking whether to enable memory checking... no
> checking whether to enable memory profiling... no
> checking for gcc... (cached) gcc
> checking whether the C compiler (gcc -g -O2 -L/sw/lib) works... yes
> checking whether the C compiler (gcc -g -O2 -L/sw/lib) is a
> cross-compiler... no
> checking whether we are using GNU C... (cached) yes
> checking whether gcc accepts -g... (cached) yes
> checking for gcc option to accept ANSI C... none needed
> checking for a BSD compatible install... /usr/bin/install -c
> checking for extra flags to get ANSI library prototypes... none needed
> checking for extra flags for POSIX compliance... none needed
> checking how to run the C preprocessor... gcc -E
> checking for ANSI C header files... yes
> checking for vprintf... yes
> checking for atexit... yes
> checking for on_exit... no
> checking size of char... 1
> checking size of short... 2
> checking size of long... 4
> checking size of int... 4
> checking size of void *... 4
> checking size of long long... 8
> checking for working const... yes
> checking for __inline... yes
> checking for __inline__... yes
> checking for inline... yes
> checking whether byte ordering is bigendian... no
> checking for float.h... yes
> checking for limits.h... yes
> checking for pwd.h... yes
> checking for sys/param.h... yes
> checking for sys/poll.h... yes
> checking for sys/select.h... yes
> checking for sys/time.h... yes
> checking for sys/times.h... yes
> checking for unistd.h... yes
> checking for values.h... no
> checking for lstat... yes
> checking for strerror... yes
> checking for strsignal... yes
> checking for memmove... yes
> checking for vsnprintf... yes
> checking for strcasecmp... yes
> checking for strncasecmp... yes
> checking for poll... yes
> checking for sys_errlist... yes
> checking for sys_siglist... yes
> checking for sys_siglist declaration... yes
> checking for fd_set... yes, found in sys/types.h
> checking for wchar.h... yes
> checking for wctype.h... yes
> checking for iswalnum... yes
> checking if iswalnum() and friends are properly defined... no
> checking whether realloc (NULL,) will work... yes
> checking for an implementation of va_copy()... yes
> checking for an implementation of __va_copy()... yes
> checking whether va_lists can be copied by value... yes
> checking for dlopen... yes
> checking for dlsym... yes
> checking for RTLD_GLOBAL brokenness... no
> checking for preceeding underscore in symbols... no
> checking for dlerror... yes
> checking for pthread.h... yes
> checking for thread implementation... posix
> checking for pthread_attr_init in -lpthread... yes
> checking necessary linker options... -lpthread
> checking necessary compiler options... -D_REENTRANT
> checking for localtime_r... yes
> checking for rand_r... yes
> checking for getpwuid_r... yes
> checking whether getpwuid_r is posix like... yes
> checking whether pthread_getspecific is posix like... yes
> checking whether pthread_mutex_trylock is posix like... yes
> checking whether pthread_cond_timedwait is posix like... yes
> checking size of pthread_mutex_t... 44
> checking byte contents of pthread_mutex_t...
> -89,-85,-86,50,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
> checking system definitions for POLLIN POLLOUT POLLPRI POLLERR POLLHUP
> POLLNVAL... done
> updating cache ./config.cache
> creating ./config.status
> creating glib.spec
> creating Makefile
> creating glib-config
> creating gmodule/gmoduleconf.h
> creating gmodule/Makefile
> creating gthread/Makefile
> creating docs/Makefile
> creating docs/glib-config.1
> creating tests/Makefile
> creating glib.pc
> creating gmodule.pc
> creating gthread.pc
> creating config.h
> creating glibconfig.h
> perl -pi.bak -e
> 's/HAVE_GETPWUID_R/HAVE_NOTHING_IMPORTANT/g' config.h
> make
> make all-recursive
> Making all in .
> CONFIG_FILES= CONFIG_HEADERS= CONFIG_OTHER=glibconfig.h ./config.status
> creating glibconfig.h
> glibconfig.h is unchanged
> echo timestamp > stamp-gc-h
> /bin/sh ./libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.
> -DG_LOG_DOMAIN=g_log_domain_glib -I/sw/include -g -O2
> -Wall -D_REENTRANT -c garray.c
> ### execution of make failed, exit code 2
> Removing runtime build-lock...
> Removing build-lock package...
> /sw/bin/dpkg-lockwait -r fink-buildlock-glib-1.2.10-51
> (Reading database ... 27756 files and directories currently installed.)
> Removing fink-buildlock-glib-1.2.10-51 ...
> Failed: phase compiling: glib-1.2.10-51 failed
>
> Before reporting any errors, please run "fink selfupdate" and
> try again. If you continue to have issues, please check to see if the
> FAQ on fink's website solves the problem. If not, ask on the fink-users
> or fink-beginners mailing lists. As a last resort, you can try e-mailing
> the maintainer directly:
>
> None <[EMAIL PROTECTED]>
>
> Note that many fink package maintainers do not have access to all possible
> hardware configurations, so you may have better luck on the mailing lists.
>
>
>
> --
> Jeff Tang
> [EMAIL PROTECTED]
> M: 646 226-3927
> F: 309 408-3219
> -------------------------------------------------------------------------
It works for me in a totally clean unstable tree. Have you made
modifications to your system?
--
Alexander K. Hansen
akh AT finkproject DOT org
Fink User Liaison and Documenter
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Fink-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/fink-users
