Hi list! :-)
this is my first message. I am using fink 0.9.0 switched to cvs.
I have installed jpilot 1.6.0-102 and pilot-link 0.12.3-2.
Until now I was not able to sync my Palm m505 on my MacBook using Leopard
10.5.5. In the settings I used "usb:" for the device.
If I start JPilot from the terminal and press the sync button in the
application I get these messages printed 4 times:
The process has forked and you cannot use this CoreFoundation functionality
> safely. You MUST exec().
> Break on
> __THE_PROCESS_HAS_FORKED_AND_YOU_CANNOT_USE_THIS_COREFOUNDATION_FUNCTIONALITY___YOU_MUST_EXEC__()
> to debug.
>
The command
> > pilot-xfer -p usb: --list
>
> Listening for incoming connection on usb:... connected!
>
> Reading list of databases in RAM...
>
works. Also the command "jpilot-sync" works as expected (syncing my Palm on
the console). Only the sync from the JPilot GUI seems to have a problem. I
also tried to recompile jpilot without the flock using fcntl (implemented by
not setting the compiler switch "USE_FLOCK") did not help.
Does someone have a solution for it?
Thanks Holger
------------------------------------------------------------------------------
SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada.
The future of the web can't happen without you. Join us at MIX09 to help
pave the way to the Next Web now. Learn more and register at
http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/
_______________________________________________
Fink-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/fink-users
