I've rebooted the one system that I have access to that *can* do so into 10.4. I'll see what happens on that system for me.
Dave Musicant wrote: > I get... > > DBUS_SESSION_BUS_ADDRESS=launchd:env=DBUS_FINK_SESSION_BUS_SOCKET > > Thanks for continuing to work this. > > > On Thu, Mar 19, 2009 at 8:46 AM, Alexander Hansen > <[email protected]> wrote: > >> What do you get from >> >> printenv | grep DBUS? (from the standard terminal) >> >> Dave Musicant wrote: >> >>> I tried a reboot also, didn't work. >>> >>> >>> On Thu, Mar 19, 2009 at 8:04 AM, Alexander Hansen >>> <[email protected]> wrote: >>> >>> >>>> I know that dbus has recently been reworked a bit. Just a shot in the >>>> dark, but maybe try a reboot. >>>> >>>> [email protected] wrote: >>>> >>>> >>>>> Thanks for the suggestions. >>>>> >>>>> I am using the standard OS X terminal. Just to verify, I just tried a >>>>> new window: no luck. For good measure, I tried >>>>> >>>>> source /sw/bin/init.sh >>>>> >>>>> both in the standard terminal, as well as in an X11 terminal, but the >>>>> exact same problems happened. >>>>> >>>>> Any further thoughts? >>>>> >>>>> -- >>>>> Dave Musicant >>>>> >>>>> On Mar 19, 2009 6:29am, Alexander Hansen <[email protected]> >>>>> wrote: >>>>> >>>>> >>>>>> On Mar 19, 2009, at 6:11 AM, Dave Musicant wrote: >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> I'm trying to get gnucash2.2.9-1 via fink unstable working, on OS X >>>>>> >>>>>> 10.4. It was working fine, but I updated packages recently, and it's >>>>>> >>>>>> experiencing trouble. Gnucash will start, but it doesn't recognize any >>>>>> >>>>>> previous configuration. It runs terribly slowly, and I get error >>>>>> >>>>>> messages dumped to the terminal window that look like: >>>>>> >>>>>> >>>>>> >>>>>> Failed to load key /apps/gnucash/general/show_splash_screen: Failed to >>>>>> >>>>>> contact configuration server; some possible causes are that you need >>>>>> >>>>>> to enable TCP/IP networking for ORBit, or you have stale NFS locks due >>>>>> >>>>>> to a system crash. See http://www.gnome.org/projects/gconf/ for >>>>>> >>>>>> information. (Details - 1: Failed to get connection to session: >>>>>> >>>>>> launchd's env var DBUS_FINK_SESSION_BUS_SOCKET does not exist)Failed >>>>>> >>>>>> to load key /apps/gnucash/general/account_separator: Failed to contact >>>>>> >>>>>> configuration server; some possible causes are that you need to enable >>>>>> >>>>>> TCP/IP networking for ORBit, or you have stale NFS locks due to a >>>>>> >>>>>> system crash. See http://www.gnome.org/projects/gconf/ for >>>>>> >>>>>> information. (Details - 1: Failed to get connection to session: >>>>>> >>>>>> launchd's env var DBUS_FINK_SESSION_BUS_SOCKET does not exist)Failed >>>>>> >>>>>> to load key /apps/gnucash/general/auto_decimal_point: Failed to >>>>>> >>>>>> contact configuration server; some possible causes are that you need >>>>>> >>>>>> to enable TCP/IP networking for ORBit, or you have stale NFS locks due >>>>>> >>>>>> to a system crash. See http://www.gnome.org/projects/gconf/ for >>>>>> >>>>>> information. (Details - 1: Failed to get connection to session: >>>>>> >>>>>> launchd's env var DBUS_FINK_SESSION_BUS_SOCKET does not exist) >>>>>> >>>>>> >>>>>> >>>>>> Any thoughts on how to proceed? I've tried a completely brand new >>>>>> >>>>>> vanilla fink install, but that didn't seem to solve the problem >>>>>> >>>>>> either. >>>>>> >>>>>> >>>>>> >>>>>> For full disclosure, here's more info: I was originally also receiving >>>>>> >>>>>> error messages that looked like: >>>>>> >>>>>> >>>>>> >>>>>> "Dynamic session lookup supported but failed: launchd did not provide >>>>>> >>>>>> a socket path, verify that org.freedesktop.dbus-session.plist is >>>>>> >>>>>> loaded!" >>>>>> >>>>>> >>>>>> >>>>>> but with a suggestion from the package maintainer (thank you!), that >>>>>> >>>>>> error was repaired by: >>>>>> >>>>>> >>>>>> >>>>>> fink reinstall dbus >>>>>> >>>>>> >>>>>> >>>>>> fink rebuild gconf2 >>>>>> >>>>>> fink reinstall gconf2 >>>>>> >>>>>> fink reinstall gnucash2 >>>>>> >>>>>> >>>>>> >>>>>> ... but I'm still left with the "Failed to load key" errors. >>>>>> >>>>>> >>>>>> >>>>>> If anyone knows how to repair this, I'd be appreciative. Thanks! >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> >>>>>> Dave Musicant >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Where are you starting from? The regular OS X terminal or an X11 >>>>>> >>>>>> >>>>> terminal? The error looks like your fink environment isn't getting >>>>> processed. >>>>> >>>>> >>>>>> If you're on the regular OS X terminal, try starting a new window to >>>>>> >>>>>> >>>>> make sure the updates that were made got processed. >>>>> >>>>> >>>>>> If you're using an X11 terminal (I'll assume you're using Apple's >>>>>> >>>>>> >>>>> X11 since you didn't specify that), then you're probably suffering >>>>> from the long-standing issue that Apple's X11 doesn't generally >>>>> process your user startup scripts. Manually running >>>>> >>>>> >>>>>> source /sw/bin/init.sh >>>>>> >>>>>> >>>>>> >>>>>> (assuming you're using bash as your shell) before starting any >>>>>> >>>>>> >>>>> applications should solve this. For something more automatic, you can >>>>> make sure that whatever mechanism you use to run the terminal uses >>>>> "xterm -ls" instead of just "xterm" to run it. (If you're not using >>>>> xterm then you'll need to use whatever syntax your terminal supports >>>>> to run a login shell) >>>>> >>>>> ------------------------------------------------------------------------------ Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com _______________________________________________ Fink-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/fink-users
