Hanspeter Niederstrasser wrote: > Thanks, JF. > > One quick thing I noticed about your log is that you're installing most > things into '/sw/share/plplot5.8.0/tcl/sqlite3', while mine and > Dominique's install uses '/sw/lib/tcl8.4/sqlite3'. Your failed command > dos look for '/sw/lib/tcl8.4/sqlite3/', so at least we know the > immediate source of your failure (what happens if you remove plplot or > plplot-dev?) Doesn't explain Dominique's error, though. > > > there is no "$(libdir)/sqlite" whatsoever to substitute ! > > Looking at the Makefile now, it uses TCLLIBDIR, which for me is set to > '/sw/lib/tcl8.4/sqlite3' in the Makefile, so that sed replacement can > technically be replaced once we figure out what's causing the other > breakage. > > Dominique, in the file > /sw/src/fink.build/sqlite3-3.6.13-1/sqlite-3.6.13/Makefile, what value > does the variable TCLLIBDIR have? > > Hanspeter > > I've got TCLLIBDIR = /sw/share/plplot5.8.0/tcl/sqlite3 on the failed build (which was with plplot installed; having just plplot-dev [and -shlibs, of course] doesn't result in the same issue).
-- Alexander Hansen Fink User Liaison ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users