I'm kicking off a build of the update, using the texinfo patch/workaround... hopefully positive results in the morning.
Fang > On 4/9/13 6:47 PM, Baudilio Tejerina wrote: >> Hi Alex. >> >> I wrote to you a few months back with a related issue: upgrading the >> package "gnuplot". >> I am updating the distribution again today and I am getting a new error >> which I've thought you'd like to hear about. >> So, here it is; the reports follows below. >> >> Regards, >> Baudilio >> >> >> >> >> My OS: (uname -a) >> Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; >> root:xnu-792.24.17~1/RELEASE_PPC Power Macintosh powerpc >> >> C compiler: (gcc -v) >> Using built-in specs. >> Target: powerpc-apple-darwin8 >> Configured with: /var/tmp/gcc/gcc-5370~2/src/configure >> --disable-checking -enable-werror --prefix=/usr --mandir=/share/man >> --enable-languages=c,objc,c++,obj-c++ >> --program-transform-name=/^[cg][^.-]*$/s/$/-4.0/ >> --with-gxx-include-dir=/include/c++/4.0.0 --with-slibdir=/usr/lib >> --build=powerpc-apple-darwin8 --host=powerpc-apple-darwin8 >> --target=powerpc-apple-darwin8 >> Thread model: posix >> gcc version 4.0.1 (Apple Computer, Inc. build 5370) >> >> >> >> >> >> fink selfupdate >> fink update gnuplot >> ... etc.... >> >> .... etc .... >> Making install in docs >> make[1]: Entering directory >> `/sw/src/fink.build/gnuplot-4.6.1-2/gnuplot-4.6.1/docs' >> ../mkinstalldirs >> /sw/src/fink.build/root-gnuplot-4.6.1-2/sw/share/gnuplot/4.6 >> /usr/bin/install -c -m 644 gnuplot.gih >> /sw/src/fink.build/root-gnuplot-4.6.1-2/sw/share/gnuplot/4.6/gnuplot.gih >> /bin/sh /sw/src/fink.build/gnuplot-4.6.1-2/gnuplot-4.6.1/missing --run >> makeinfo -I. ./gnuplot.texi --no-split --output=gnuplot.info >> ./gnuplot.texi:9193: warning: @ref should not appear in @uref >> ./gnuplot.texi:17626: raising the section level of @subsubsection which >> is too low >> make[1]: *** [gnuplot.info] Error 1 >> make[1]: Leaving directory >> `/sw/src/fink.build/gnuplot-4.6.1-2/gnuplot-4.6.1/docs' >> make: *** [install-recursive] Error 1 >> ### execution of /var/tmp/tmp.2.47lNgh failed, exit code 2 >> Removing runtime build-lock... >> Removing build-lock package... >> /sw/bin/dpkg-lockwait -r fink-buildlock-gnuplot-4.6.1-2 >> (Reading database ... 210770 files and directories currently installed.) >> Removing fink-buildlock-gnuplot-4.6.1-2 ... >> Failed: phase installing: gnuplot-4.6.1-2 failed >> >> Before reporting any errors, please run "fink selfupdate" and try again. >> If you continue to have issues, please check to see if th FAQ on Fink's >> website solves the problem. If not, ask on one of these mailing lists: >> >> The Fink Users List <[email protected]> >> The Fink Beginners List <[email protected]>, >> >> with a carbon copy to the maintainer: >> >> Alexander Hansen <[email protected]> >> >> Note that this is preferable to emailing just the maintainer directly, >> since most fink package maintainers do not have access to all possible >> hardware and software configurations. >> >> Please try to include the complete error message in your report. This >> generally consists of a compiler line starting with e.g. "gcc" or "g++" >> followed by the actual error output from the compiler. >> >> Also include the following system information: >> Package manager version: 0.30.2 >> Distribution version: selfupdate-rsync Tue Apr 9 20:31:42 2013, 10.4, >> powerpc >> Trees: local/main stable/main stable/crypto unstable/main unstable/crypto >> Xcode Version: 2.5-1 >> > > gnuplot's document sources are incompatible with texinfo-5.x. The 4.6.2-1 > version in the supported distribution (10.5 and later) has been fixed to > account for this. > > I don't support 10.4, but I do have a couple of suggestions to work around > the problem: > > 1) If you can, use "fink remove texinfo" so that the older texinfo installed > a part of the OS can be used. I don't know for sure whether that version is > _new_ enough, however. > > 2) Edit /sw/fink/10.4/stable/main/finkinfo/10.4-EOL/gnuplot.info and add > > perl -pi -e 's/sub(subsection aed767)/\1/' docs/%{ni}.texi > > to the PatchScript block. > -- David Fang http://www.csl.cornell.edu/~fang/ ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis & visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter _______________________________________________ Fink-users mailing list [email protected] List archive: http://news.gmane.org/gmane.os.macosx.fink.user Subscription management: https://lists.sourceforge.net/lists/listinfo/fink-users
