This issue is actually due to the previous update to the newer
freetype219 release which deprecated those headers and is only triggered by
my update because it caused a rebuild against the newer freetype219. Is the
issue was present before the update (but only on 10.7). We saw this issue
in a number of other packages after the freetype219 update last year.
Jack
On Mon, Jun 22, 2015 at 2:51 PM, Alexander Hansen <
alexanderk.han...@gmail.com> wrote:
>
> > On Jun 20, 2015, at 00:11, Saleh Elmohamed <
> m.a.saleh.elmoha...@gmail.com> wrote:
> >
> > Hi guys,
> >
> > looks like the aforementioned xdvi-22.86-1 package failed as shown
> > below...
> >
> > thanks,
> > Saleh
> >
> > =====================================
> >
> >>>> saleh$ fink selfupdate
> >
>
> <>
> 10.7/stable/main/finkinfo/text/xdvi.info
> <>
>
> <snipping irrelevant output from gtkglext1>
> We vary rarely need to see output from any package other than the one that
> failed.
>
> <snip>
>
> > gcc -c -I. -I. -O2 -D_DARWIN_C_SOURCE -I/sw/include -I/usr/X11/include
> -I/sw/include/freetype2 dvi-draw.c
> > In file included from dvi-init.c:30:
> > In file included from ./xdvi.h:178:
> > /usr/X11/include/ft2build.h:56:10: fatal error: 'freetype/cIn file
> included from onfdvi-draw.ci:g30/:
> > fIn file included from t./xdvi.hh:e178a:
> > der.h'/usr/X11/include/ft2build.h :f56i:l10e: notfatal error: fou'nfdre
> > etype/config/ftheader.h' file not found
> > In file included from xdvi.c:78:
> > In file included from ./xdvi.h:#include <freetype/config/ftheader.h>178
> > :
> > ^
> > /usr/X11/include/ft2build.h:56:10: fatal error:
> 'freetype/config/ftheader.h' file not found
> > #include <freetype/config/ftheader.h>
> > ^
> > In file included from #include <freetype/config/ftheader.h>
> > ^
> > events.c:30:
> > In file included from ./xdvi.h:178:
> > /usr/X11/include/ft2build.h:56:10: fatal error:
> 'freetype/config/ftheader.h' file not found
> > #include <freetype/config/ftheader.h>
> > ^
> > 1 error generated.
> > Makefile:55: recipe for target 'dvi-init.o' failed
> > make: *** [dvi-init.o] Error 1
> > make: *** Waiting for unfinished jobs....
> > 1 error generated.
> > Makefile:55: recipe for target 'dvi-draw.o' failed
> > make: *** [dvi-draw.o] Error 1
> > 1 error generated.
> > Makefile:55: recipe for target 'xdvi.o' failed
> > make: *** [xdvi.o] Error 1
> > 1 error generated.
> > Makefile:55: recipe for target 'events.o' failed
> > make: *** [events.o] Error 1
> > ### execution of /tmp/fink.VNJ9B failed, exit code 2
> > ### execution of /tmp/fink.4oHCE failed, exit code 2
> > Removing runtime build-lock...
> > Removing build-lock package...
> > /sw/bin/dpkg-lockwait -r fink-buildlock-xdvi-22.86-1
> > (Reading database ... 305822 files and directories currently installed.)
> > Removing fink-buildlock-xdvi-22.86-1 ...
> > Updating the list of locally available binary packages.
> > Scanning dists/stable/main/binary-darwin-x86_64
> > New package:
> dists/stable/main/binary-darwin-x86_64/graphics/gtkglext1-shlibs_1.2.0-3_darwin-x86_64.deb
> > New package:
> dists/stable/main/binary-darwin-x86_64/graphics/gtkglext1_1.2.0-3_darwin-x86_64.deb
> > Failed: phase compiling: xdvi-22.86-1 failed
> >
> > Before reporting any errors, please run "fink selfupdate" and try again.
> > Also try using "fink configure" to set your maximum build jobs to 1 and
> > attempt to build the package again.
> > If you continue to have issues, please check to see if the FAQ on Fink's
> > website solves the problem. If not, ask on one (not both, please) of
> > these mailing lists:
> >
> > The Fink Users List <fink-users@lists.sourceforge.net>
> > The Fink Beginners List <fink-beginn...@lists.sourceforge.net>,
> >
> > with a carbon copy to the maintainer:
> >
> > Dave Morrison <d...@finkproject.org>
> >
> > Note that this is preferable to emailing just the maintainer directly,
> > since most fink package maintainers do not have access to all possible
> > hardware and software configurations.
> >
> > Please try to include the complete error message in your report. This
> > generally consists of a compiler line starting with e.g. "gcc" or "g++"
> > followed by the actual error output from the compiler.
> >
> > Also include the following system information:
> > Package manager version: 0.38.6
> > Distribution version: selfupdate-rsync Fri Jun 19 23:57:22 2015, 10.7,
> x86_64
> > Trees: local/main stable/main
> > Xcode.app: 4.6.3
> > Xcode command-line tools: 4.6.0.0.1.1365549073
> > Max. Fink build jobs: 4
> >
>
>
> I see the same thing.
>
> cc’ing Jack Howarth, as the last updater.
>
> Here’s a single build job version of the output:
>
> gcc -c -I. -I. -O2 -D_DARWIN_C_SOURCE -I/sw/include -I/usr/X11/include
> -I/sw/include/freetype2 xdvi.c
> In file included from xdvi.c:78:
> In file included from ./xdvi.h:178:
> /usr/X11/include/ft2build.h:56:10: fatal error:
> 'freetype/config/ftheader.h' file
> not found
> #include <freetype/config/ftheader.h>
> ^
>
> 10.7 has a /usr/X11/include/ft2build.h from Apple’s X11, whereas Xquartz
> does not have an analogue at that level—it has
> /opt/X11/include/freetype2/ft2build.h .
> --
> Alexander Hansen, Ph.D.
> Fink User Liaison
>
>
------------------------------------------------------------------------------
Monitor 25 network devices or servers for free with OpManager!
OpManager is web-based network management software that monitors
network devices and physical & virtual servers, alerts via email & sms
for fault. Monitor 25 devices for free with no restriction. Download now
http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
_______________________________________________
Fink-users mailing list
Fink-users@lists.sourceforge.net
List archive:
http://news.gmane.org/gmane.os.macosx.fink.user
Subscription management:
https://lists.sourceforge.net/lists/listinfo/fink-users
