Hello Daniel,
I just want to mention that in my code, in line 205 "
phi.setValue(phi.value / phi.value.max() * 200) " you should delete this
before running the code to see the phi values greater than 200. I tried
to do something to update phi value for few iterations to see if the
warm up period affect the result or not. The code was not finished
before I send it to you. So please just delete that line before running
the code.
Thanks
Mohammad
------ Original Message ------
From: "Mohammad Madani" <mada...@uwindsor.ca>
To: fipy@nist.gov; "Multiple recipients of list" <fipy@nist.gov>
Sent: 2019-11-27 3:11:56 PM
Subject: Re[4]: Need help to set up the model
Hello Daniel,
Thank you so much for your response.
I pickled the necessary data required to run the model. please find attached
file. Please let me know if you that works or if need anything else.
Thanks
Mohammad
------ Original Message ------
From: "Daniel Wheeler" <daniel.wheel...@gmail.com>
To: "Multiple recipients of list" <fipy@nist.gov>
Sent: 2019-11-27 2:16:09 PM
Subject: Re: Re[2]: Need help to set up the model
Hi Mohammad,
I can't actually run the example because I don't have netCDF4
installed. Could you possible formulate a simpler example without that
requirement? There are a number of things that I would change in the
example, but I need to be able to run it to see if those are relevant
to the issues that you're seeing.
Cheers,
Daniel
On Sun, Nov 24, 2019 at 4:02 PM Mohammad Madani <mada...@uwindsor.ca> wrote:
Thank you for helping me with the mesh.
--
Daniel Wheeler
_______________________________________________
fipy mailing list
fipy@nist.gov
http://www.ctcms.nist.gov/fipy
[ NIST internal ONLY: https://email.nist.gov/mailman/listinfo/fipy ]
_______________________________________________
fipy mailing list
fipy@nist.gov
http://www.ctcms.nist.gov/fipy
[ NIST internal ONLY: https://email.nist.gov/mailman/listinfo/fipy ]
